Philips DVDR985 owner manual Analog Output

Page 57

If you connected the DVD Recorder’s red and white AUDIO OUT jacks to a Stereo (or Stereo TV) as shown on pages 10-13, choose a setting for Analog Output.

You do not need to adjust this setting if you used the DIGITAL AUDIO OUT (OPTICAL or COAX) jacks on the DVD Recorder.

Check your Stereo and see if it is compatible with Dolby Surround or TruSurround. Then follow the steps below to choose the Analog Output setting that is most compatible with your audio equipment (or TV).

1 Press SYSTEM MENU. may be selected. If it is not, press ; to select it.

2 Press 9 repeatedly to select G, then press :.

3 Press 9 to select Analog output, then press :. Analog output may be selected already. If so, just press : to continue.

4 Press 8 or 9 to select Stereo, Surround, or 3D sound, then press OK.

●Select Stereo to hear stereo sound. This will work with any type of equipment that has right and left audio jacks (usually red and white).

●Select Surround if your audio equipment is compatible with Dolby Surround. If it is, usually a Dolby Pro Logic logo will appear on the equipment.

●Select 3D sound if you want to enjoy surround sound but your equipment is not Dolby Pro Logic compatible.

	W	X	Y	Z	a
~	1	2	1en	off no	off
					Sound
G	Digital output
G	Analog output			s Stereo	L
	Analog output			s Stereo	L
r	Night mode			Surround
r

3D sound

5 Press SYSTEM MENU to remove the menus.

TruSurround and the symbol are trademarks of SRS Labs, Inc. TruSurround technology is incorporated under license from SRS Labs, Inc.

Analog Output 57

MONITOR		ON/OFF
PREVIOUS	REC/OTR	NEXT
PREVIOUS		NEXT

1,5 SLOW FORWARD

PLAY

4

2-4TIMER SELECT

VOL

CH

MUTE

T/C

A/CH

ZOOM ANGLE SUBTITLE AUDIO

DIM

REPEAT

REPEAT

SCAN

Helpful Hint

•You also can set analog sound in the Menu Bar. Details are on page 31.

Image 57

Contents DVDR985 Dear Philips product owner It to us right nowFor Customer Use Contents Safety Information Example of Antenna Grounding Per National Electrical Code Safety Information cont’dIntroduction Discs for Recording and Playing Playable DiscsDiscs Unsuitable for Recording or Playing Discs for Playing OnlyGeneral Information Hookups Using an RF ModulatorDetermining the best possible connection Before you beginHookups cont’d Connecting to a TV Only TV has Component Video In JacksConnecting to a TV Only TV has an S-Video In Jack Connecting to a TV Only TV has a yellow Cvbs Video In jack Example only Antenna Or Cable TV Signal Set the Digital output accordingly. Details are on Cable Box/Satellite Receiver VCR/DVD PlayerTo copy videotapes, see the Quick Start Guide Initial Setup Press ON/OFFy to turn on the RecorderEnglish, Espanol, or Francais, then press the OK button Initial Setup cont’d From previousPress System Menu To stop playback at any time, press Stop C Quick Disc PlaybackDVD+RW DVD+R Quick RecordingRemote Control Buttons Slow H Button Timer ButtonForward D Button Play ButtonFront Panel HQ, SP, LP, or EP DisplayMPEG, DIGITAL, DTS, or PCM Audio format of the current Disc DB scaleRear Panel Menu Bar Menu BarsOn-screen Symbols On-screen Symbols, Status BoxStatus Box Disc status iconsTimer Information box Information BoxesTuner Information box Title/Disc menus Chapter/Track SelectionPress Disc Menu during Disc playback Subtitles Audio LanguageButton During playback, press the Subtitle Z buttonZoom, Camera Angle ZoomCamera Angle Sound Still Picture/Frame-by-frame PlaybackPress System Menu to remove the Menu Bar Slow Motion, Forward and Reverse Searching Slow MotionForward and Reverse Searching Time Search, Scan Time SearchScan Repeat, Repeat A-B RepeatRepeat A-B Index Picture Screen Title Settings MenuTitles Disc BarInstallation Automatic Channel Programming Installation VCR Plus+ Ch Time/Date Automatic Installation Clock SettingTime/Date Manual Installation Clock Setting cont’dOne-Touch Recording Remote control Timer RecordingVCR Plus+ Timer Recording Error Messages Erasing Timer RecordingsPlay full title Title Settings MenuErase this title Press to return to the Index Picture Screen if necessaryManual Recording Volume You can adjust manually the volume level during recordingAppend recording Chapter Markers Record SettingsErase disc DVD+RW only Make edits compatible DVD+RW onlyFinalize Disc DVD+R only, if not finalized already DVD+R DVD+RW EditingAccess Control Change CodePress 9 repeatedly to select Change code, then press Child Lock Access Control cont’dPlay unless you enter your four-digit code Press System Menu to remove the menusScreen. Child Lock should be Locked. Details are on Locking or Unlocking Specific DiscsPlay Parental LevelChange Country Access Control contdOff no User Preference SettingsPicture Settings Digital Output To select it Press 9 repeatedly to select G, then pressPress 89 to select Off, PCM only, or All, then press OK Analog Output Language Settings, Recording Audio Language SettingsRecording Audio Night Mode, Remote Control Settings Night ModeRemote Control Settings Using Your Recorder’s Remote Control with Your TV Automatic Remote SetupManual Remote Setup Using Your Recorder’s Remote Control with Your TV cont’d Helpful Hints Helpful Hints contd Glossary Diagnostic Test Disc Formats Supported SpecificationsRenewed 49-53 Information Index