Turn on progressive scan
Note
•To use the progressive scan feature, you must connect a progressive scan TV with the component video jacks (see “Connect” > “Connect video cables” > “Option 2: Connect to the component video jacks” for details).
Video Steup |
|
TV System | On |
TV Display | Off |
Progressive |
|
Picture Setting |
|
1Turn on the TV to the correct viewing channel for this product.
2Press SETUP.
3Press 
to select [Video Setup].
4Select [Progressive] > [On], then press OK. » A warning message is displayed.
5To proceed, select [Ok] and press OK. » The progressive setup is complete.
Note
•If a blank/distorted screen is displayed, wait for 15 seconds for the auto recovery.
•If no picture is displayed, turn off the progressive scan mode as follows:
•1) Press 
to open the disc compartment.
•2) Press the Numeric button ‘1’.
6Press SETUP to exit the menu.
7You can now turn on the progressive scan mode on the TV (see the TV user manual).
Note
•During play, when the progressive scan mode is on for both this product and the TV, distorted picture may display. In this case, turn off the progressive scan feature on both this product and the TV.
5 Play
Play a disc
Caution
•Do not place any objects other than discs into the disc compartment.
•Do not touch the disc optical lens inside the disc compartment.
1 Press 
PUSH TO OPEN to open the disc compartment.
2Load a disc with its label facing up.
3Close the disc compartment and start disc play.
•To view disc play, turn on the TV to the correct viewing channel for this product.
•To stop disc play, press 
.
Note
•Check the types of discs supported (see “Specifications” > “Play media”).
•If the password entry menu is displayed, enter the password before you can play the locked or restricted disc (see “Adjust settings” > “Preferences” > [Parental]).
•If you pause or stop a disc, the screen saver appears after 5 minutes of inactivity. To deactivate the screen saver, press DISC MENU.
•After you pause or stop a disc and no button is pressed within 15 minutes, this product automatically switches to standby.
Play video
Note
•Some operations may not work with some discs. See the information accompanying the disc for details.
Control video play
1Play a title.
2Use the remote control to control the play.
Button | Action | |
|
| Start, pause or resume disc play. |
|
| Stop disc play. |
, |
| Skip to a previous/next title or |
| ||
| ||
|
| chapter. |
English
EN 9