1Connect the supplied AV cables to:
•the AV OUT jack (3.5mm) on this product.
•the audio input jacks on the device.
Connect USB flash drive
1Connect a USB flash drive to thejack on this product.
Note
•This product can only play/view MP3, WMA, DivX or JPEG files that are stored on a USB flash drive.
•Press the button to access the content and play the files.
Connect power
Caution
•Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back of the unit.
•Before connecting the AC power cord, ensure you have completed all other connections.
4 Get started
Prepare the remote control
1Open the battery compartment.
2Insert 2 AAA batteries with correct polarity
3Close the battery compartment.
Caution
•Remove batteries if they are exhausted or if the remote control is not to be used for a long time.
•Do not mix batteries (old and new or carbon and alkaline, etc.).
•Batteries contain chemical substances, so they should be disposed of properly.
Note
•The type plate is located on the bottom of the product.
1 Connect the AC power cable:
•to this product.
•to the wall outlet.
Find the correct viewing channel
1Press to turn on this product.
2Turn on the TV and switch to the correct
Select menu display language
•The language options may vary from different regions.
1 Press SETUP.
» [General Setup] menu is displayed.
2Select [OSD Language], then press.
3 Press to select a language, then press OK.
8EN