Tape Operation/Recording
English
Preparation for recording
1Select TAPE source.
2Load a recordable tape into the tape deck with the full spool to the left.
3Prepare the source to be recorded. CD/VCD – load the disc.
TUNER – tune to the desired radio station. AUX – connect external equipment.
When recording is in progress
➜ REC is shown.
●To stop recording, press 9.
●It is not possible to listen to another source.
Synchro start CD recording
1Select CD source.
●Press S or T to select the desired track to start recording.
●You can programme the tracks in the order you want them to be recorded (refer to “CD/MP3- CD Operations - Programming the disc tracks”).
2Press REC to start recording.
➜ Playing of the CD programme starts automatically from the beginning of the CD after 7 seconds. It is not necessary to start the CD player separately.
One touch recording
1Select VCD/CD, TUNER or AUX source.
2If necessary, start playback of the selected source.
3Press REC to start recording.
Recording timer
To record from the radio, you will need to use a preset radio station and to set a start (ON) and finish (OFF) time.
1Select the preset radio station to record from (refer to “Radio Reception - Tuning to preset radio stations”).
2In standby mode, press TIMER SET for more than two seconds.
➜ The current selected source is displayed.
3Press SOURCE repeatedly until “REC TUN” source is displayed.
4Press TIMER SET to confirm the source.
➜ “SET ON TIME” is displayed and the clock digits for the hours flash.
5Press VOLUME +/- to set the hours.
6Press TIMER SET again.
➜ The clock digits for the minutes flash.
7Press VOLUME +/- to set the minutes.
8Press TIMER SET to confirm the recording start time.
➜ “SET OFF TIME” is displayed and the clock digits for the hours flash.
9Repeat steps
0Press TIMER SET to confirm the timer settings.
➜ 
is shown and the recording timer is now set.
Note:
–The recording timer will not be activated if the system is in tape play mode.
22
