Philips MCV250/21 Text display and ID3 Text, Erasing the program, Programming the disc tracks

CD/VCD/MP3-CD Operation

1To select your play mode, press the REPEAT or SHUFFLE on the remote control before or during playback until the display shows the desired function. (SHUFFLE, REP, REP ALL)

2Press ÉÅto start playback if in the STOP position.

3To return to normal playback, press REPEAT or SHUFFLE until the various SHUFFLE / REPEAT modes are no longer displayed.

●You can also press STOP 9 to cancel your play mode.

Text display and ID3 Text

In CD mode

●Press DISPLAY repeatedly to see the following information.

➜Track number and elapsed play time of current track.

➜Remaining play time of current track.

➜Total number of tracks played and total played-back time.

➜Total remaining number of tracks and total remaining play time.

In MP3-CD mode

This feature is used to display the title and album name for MP3-CD.

●Press DISPLAY repeatedly to display the title or album name and ID3 Text.

Notes:

–Album No.,Title No. & Playing time

–Title name album name, ID3 Text & playing time

●To end programming without starting playback, press Ç once.

Notes:

–Programme cannot be used for VCDs when PBC is switched on. Switch off PBC before storing tracks.

–If you attempt to programme more than 20 tracks, "FULL" will be displayed.

Erasing the program

You can erase the program by:

●pressing STOP 9 twice during playback;

●opening the CD compartment;

●change to other source

Playing a mixed mode disc

This set can play a mixed mode disc.

–mixture of audio CD and MP3-CD

–mixture of other combination may not be operated normally.

1As default, audio CD tracks will be read first.

2Press MIX/SEL (on the remote control)

repeatedly to select other disc modes.

●MP3-CD:

➜MP3 is displayed.

➜TV screen, MP3 menu is displayed.

Note :

For protected CDs,“MIX CD-DA” is displayed on your TV screen even if the disc does not have other format. The MIX/SEL normal functions are not available for protected CDs.

English

Programming the disc tracks

Programming tracks is possible when playback is stopped. Up to 20 tracks can be stored in the memory in any order.

1Load the desired disc on the disc tray.

2Press the VCD/ CD button to select the Source.

3Press PROGRAM to start programming.

➜A track number is shown and PROG appears. 4 Press 4 / ¢ (or Digits 0-9on the remote

control) repeatedly to select the desired track. ● For MP3-CD, 4 / ¢ to select the desired

Album and Title for programming.

5Press PROGRAM to store the track.

●Repeat steps 3–5to store other tracks.

6PressÉÅto start programme playback.

15