Radio Reception
|
|
| English |
VCD/CD | TUNER | TAPE | AUX |
ECHO |
|
|
|
KEY | PROG |
|
|
ALBUM |
|
| ALBUM |
DBB | IS |
| DSC |
Tuning to radio stations
1Select TUNER source.
➜ “TUNER” is displayed briefly.
2Press BAND to select the desired waveband : FM or MW.
3Press and hold S or ¢ and then release it.
➜The display will show "SEARCH" until a radio station with sufficient signal strength is found.
➜If a FM station is received in stereo, is shown.
4Repeat step 3 if necessary until you find the desired station.
●To tune to a weak station, press S or ¢ briefly and repeatedly until you have found optimal reception.
Programming radio stations
You can store up to 40 radio stations in the memory.
Manual programming
1Tune to your desired station (refer to “Tuning to radio stations”).
2Press PROGRAM to activate programming. ➜ prog flashes on the display.
3Press 4 or 3 to allocate a number from 1 to 40 for this station.
4Press PROGRAM again to confirm the setting. ➜ prog disappears, the preset number and the frequency of the preset station are shown.
5Repeat the above four steps to store other stations.
●You can override a preset station by storing another frequency in its place.
Deleting preset radio stations
●Press and hold Ç until “CLR ALL” is displayed. ➜ All preset radio stations will be deleted.
Automatic programming
Press PROGRAM for more than two seconds to activate programming.
➜All available stations are programmed.
➜AUTO is displayed and available stations are programmed in order of waveband reception strength: FM followed by MW The last preset automatically stored will then be played.
19