Playback Features
English
Starting disc playback
APress SELECT on the remote control until ‘DVD’ is lighted on the remote control display (see remote control, page 18).
BTurn on the TV to the correct programme number for the DVD player (e.g. ‘EXT’, ‘0’, ‘AV’).
CPress
DPress OPEN CLOSE on the front of the DVD player.
EPlace a disc into the disc tray with the label facing up, then press OPEN CLOSE.
For
FPlayback may start automatically. If not, press PLAY X.
If a disc menu appears on the TV, see page 25 'Using the Disc Menu'.
If the child lock was activated for the inserted disc, you have to enter your six- digit password (see page 44).
For more playback features, see pages 24~32.
Basic playback controls
Unless otherwise stated, all operations described are based on Remote Control use.
Pausing playback
ADuring playback, press PAUSE Å to pause playback and display a still picture.
Sound will be muted.
BPress PAUSE Åagain to select the next picture frame.
CTo resume normal playback, press PLAY X again.
Selecting title/chapter/track
Press . / > or use alphanumeric keypad
The playback skips to the selected title/chapter/track.
During repeat playback of a title/chapter/ track, pressing . / > will replay the same title/chapter/track.
Stopping playback
Press STOP .
Tips:
–Screen saver will start automatically if the disc playback is stopped for 15 minutes.
–The player will automatically switch to Power Standby mode if you do not press any buttons for 30 minutes after the disc has stopped playing.
TIPS: The operating features described here might not be possible for certain discs. Always refer to the instructions supplied with the discs.
24