DVD Menu Options (continued)
Digital Audio Setup
This setting is only required when connecting DVD player’s COAXIAL/ OPTICAL OUT socket to other audio/ video device. The options included in Digital Audio Setup are: { Digital Output } and { LPCM Output }.
AIn ‘Audio Setup Page’, use S T keys to
highlight { Digital Audio Setup }, then press X.
BPress S T keys to highlight an option.
CEnter its submenu by pressing X.
DPress S T keys to select a setting and press OK to confirm.
{Digital Output }
Select this if you connect to a multichannel decoder/receiver.
–{ All }
Select this if the connected device has a
–{ PCM }
Select this if the connected device is not capable of decoding multichannel audio. The DVD player will convert the Dolby Digital and
–{ Off }
To deactivate the digital audio output. For example, if you use the AUDIO OUT sockets to connect to a TV or stereo system.
{LPCM Output }
Select this if you connect to a PCM compatible receiver. Discs are recorded at a certain sampling rate with the higher sampling rate, the better sound quality.
–{ 48kHz }
Select this if the playback disc is recorded at a sampling rate of 48kHz.
–{ 96kHz }
Select this if the playback disc is recorded at a sampling rate of 96kHz that can only be achieved in
HDMI Audio
This feature is available for automatic audio selection only when HDMI devices is connected and recognized.
AIn ‘Audio Setup Page’, use S T keys to highlight { HDMI Audio }, then press X.
{Off }
Select this to turn off HDMI output.
{On }
Select this to turn on HDMI output.
BUse S T keys to select a setting and press OK to confirm.
English
TIPS: The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SYSTEM MENU to exit the menu item.
37