Philips DVP256K, HTP3256K/93 manual Using the remote control

English

Remote Control (continued)

Using the remote control	CAUTION!
	–	Remove batteries if they are
	exhausted or if the remote control
	is not to be used for a long time.
	–	Never mix batteries (old and new
	or carbon and alkaline, etc.).
	–	Batteries contain chemical
	substances; they should be disposed
	of properly.

A Open the battery compartment.

B Insert two batteries type R03 or AAA, following the indications (+-) inside the compartment.

C Close the cover.

D Point the remote control directly at the remote sensor (IR) on the front panel.

Note:

Never place any objects between the remote control and this unit while operating.

E Select the desired function (for example u).

12