Philips DVP3030A/94 user manual Buttons do not work

Page 29

Troubleshooting

Problem

Solution

No return to start-up screen when disc is removed

The player does not respond to the Remote Control

–Reset the unit by switching the player off, then on again.

–Aim the Remote Control directly at the sensor on the front of the player.

–Reduce the distance to the player.

–Replace the batteries in the Remote Control.

–Re-insert the batteries with their polarities (+/– signs) as indicated.

Buttons do not work	– To completely reset the player, unplug the adaptor
		from the AC outlet for 5-10 seconds.
Player does not respond to some	–	Operations may not be permitted by the disc.
operating commands during playback.		Refer to the instructions of the disc jacket.
DVD Player cannot read	–	Use a commonly available cleaning CD/DVD to
CDs/DVDs		clean the lens before sending the DVD Player for
		repair.
Menu items cannot be selected	–	Press STOP twice before selecting System Menu.

– Depending on the disc availability, some menu items cannot be selected.

Visit us at www.philips.com/support for service support

29

3139 246 15972

Image 29

Contents DVD Video Player General Information Laser safetyEnvironmental Information LaserPage Contents Introduction Supplied accessoriesCare and safety information Connections Using Composite Video jacks CvbsUsing S-Video jack Using an accessory RF modulator Using Component Video jacks Y Pb PrOptional Connecting speakers Connecting the adaptorReceiver has a PCM, Dolby Digital, or MPEG2 decoder Optional Connecting to an Audio SystemOptional Connecting Digital AV Receiver Front and Rear Panels Functional OverviewRemote Control Setting up the TV Inserting batteries into the Remote ControlUsing the Remote Control to operate the Player Getting StartedPress System Menu Setting the TV DisplaySelecting the color system that corresponds to your TV Setting the OSD Language Setting language preferenceSetting the Audio, Subtitle and DVD menu language Press 2 to select LANGUAGE, then press OKPlayable Discs Disc OperationsRegion Codes Your DVD Player will playPlaying discs Power ResumeUsing the Disc Menu Play B Basic playback controlsForward / Reverse Searching DVD/VCD/CD Slow Motion DVD/VCDPreview DVD/VCD For DVDPlaying MP3/JPEG Picture CD Special DVD featuresRepeat Playback selectionZoom picture Jpeg Playback with multi-angles JpegLanguage DVD Setup Menu OptionsVideo Setup Video Setting the Video OutputProgressive turning on/off OFFDigital Output Audio SetupALL PCMLpcm Output Night Mode turning on/off48kHz Playback a disc recorded at the sampling rate of 48kHzRating Changing the Password Rating explanations Setting the Rating Restoring to original settings Audio Format SpecificationsProblem Solution TroubleshootingButtons do not work Glossary Page 3139 246 Sgp-SL-0533/94-2 Meet Philips at the Internet