DVD Menu Options (continued)
Downmix
This option allows you to set the stereo analog output of your DVD player.
AIn ‘Audio Setup Page’, press S T to select { Downmix }, then press X.
{Stereo }
Select this option when output delivers sound from only the two front speakers.
{LT/RT }
Select this option if your DVD player is connected to a Dolby Pro Logic decoder.
BUse S T to select a setting and press OK to confirm.
Digital Audio
The options included in Digital Audio are: {Digital Output} and {LPCM Output}.
AIn ‘Audio Setup Page’, press S T to
select { Digital Audio Setup }, then press X.
BPress S T to select an item, then press X to access.
CUse S T to select a setting and press OK to confirm.
Digital Output
Set the Digital Output according to your optional audio equipment connection.
{All }
Select this if the connected device has a
{PCM Only }
Select this if the connected device is not capable of decoding multichannel audio. The DVD player will convert the Dolby Digital and
{SPDIF Off }
To deactivate the digital audio output. For example, if you use the AUDIO OUT sockets to connect to a TV or stereo system.
LPCM Output
If you connect the DVD player to a PCM compatible receiver via the digital terminals, such as coaxial or optical etc, you may need to adjust ‘LPCM Output’.
{48K }
Playback a disc recorded at the sampling rate of 48kHz.
{96K }
Playback a disc recorded at the sampling rate of 96kHz. This rate can only be achieved in
Tip:
–Discs are recorded at a certain sampling
rate. The higher the sampling rate, the better sound quality. LPCM Output can be selected only when PCM Only is activated.
English
TIPS: The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
29