Philips SL-0721/94-2, DVP3136 Night Mode Audio Output, Down Sampling, Multi channel, Stereo

DVD Menu Options (continued)

Night Mode Audio Output

This mode optimizes playback of sound at low volume. High volume outputs will be softened and low volume outputs are brought upward to an audible level.

AIn ‘Audio’, press ST to select { Night Mode }, then press X.

{Off }

Turns off night mode feature. Select this to enjoy the surround sound with its full dynamic range.

{On }

Select this to set low volume output. This feature is only available for movie discs with Dolby Digital mode.

BUse ST to select a setting and press OK to confirm.

Down Sampling

You can enable and disable the digital signal for better sound output quality.

AIn ‘Audio’, press ST to select { Down Sampling }, then press X.

{Off }

Playback a disc recorded at the sampling rate of 96kHz. This rate can only be achieved in Stereo-Classic (Flat) mode.

{On }

Playback a disc recorded at the sampling rate of 48kHz.

BUse ST to select a setting and press OK to confirm.

You can set the audio output of the DVD Player.

AIn ‘Audio’, press ST to select { Audio Output }, then press X.

{Multi channel }

All channels could output audio.

{Stereo }

Only left channel and right channel could output audio.

BUse ST to select a setting and press OK to confirm.

Tip:

– During Multi Channel mode you may not be able to hear the complete spectrum of music/dialogue through the amplifi er output with some Multi Channel discs.

English

TIPS: The underlined option is the factory default setting.

Press W to go back to previous menu item. Press SETUP to exit the menu item.

35

dvp3136_94_eng 4.indd 35 2007-06-05 9:58:31 AM