Philips DVP3320/55 service manual Software upgrade

4-1

Software upgrade

How to upgrade the software

1)Burn the data onto a blank CD-R or RW disc.

A.Procedure for software upgrade:

1)Power on the set and insert the prepared Upgrade CDR.

2)The set will starts reading disc & response with the following display TV screen:

Loading

Firmware Upgrade Erase and program.

OK Cancel

Select OK to start upgrade.

3)Press <OK> button to confirm, then screen will display :

Firmware Upgrade Programming, Please Wait...

Do not Switch the Player Off !

4)The upgraded disc will automatically out when files coping complete, then take out the disc.

5)About 1 minute later, the tray will automatically close when upgrading complete.

B. Read out the Firmware version to confirm the

upgrading

1)Power on the set and Open the tray door.

2)Press <9><6><6>button to check the software information.

The software version and other information are display on the TV screen as follows:

BE Version: DVP33XX_XX.XX

FE Version: XXXX.XXXXXX

DSP Version: DSP.XX

Region Code: X

Caution: The set must not be power off during upgrading, Otherwise the Main board will be damaged entirely.

Region Code Change

1)Power on the set and open the tray door;

2)Press "9" "8" "7" "9" and press the region code number (0-6) on the remote control.

Notes:restart after above steps.