E n g l i s h
Progressive
This feature is only applicable if you have connected this DVD Player to a Progressive Scan TV through the Y Pb Pr jacks.
1 Press 34 to highlight ‘Progressive’.
2 Enter its submenu by pressing 2.
3 Move the cursor by pressing 34 to highlight the selected item.
➜ On: Enable Progressive Scan video.
➜ Off: Disable Progressive Scan video.
Helpful Hint:
– If a blank/distorted TV screen appears, wait for 15 seconds for auto recover.
– Follow the instructions shown on the TV to confirm the selection (if any).
HINTS:(refer to the owner's manual)
ACTIVATING PROGRESSIVE:
1. Ensure your TV has progressive scan.
2. Connect with YPbPr(GBR) video cable.
3. If there is a blank screen on normal TV, wait 15 seconds for auto recover.
OK |
| Cancel |
< > - Move OK - Select
Confirm again to use progressive scan
If picture is good press OK on remote
OK |
| Cancel |
TO DEACTIVATE PROGRESSIVE: 1. Open tray
2. Press '1' Key
< > - Move OK - Select
19/03/2004, 2:568239PM 300 32131