Connections |
| ||
|
|
| Connecting the power cord |
RF coaxial cable to TV |
| ||
2 |
|
|
|
Back of RF Modulator | |||
| (example only) | ||
INT IN TO TV VIDEO | AUDIO IN |
| |
IN | R | L |
|
|
| CH3 | CH4 |
Antenna or |
|
|
|
Cable TV signal |
| 1 |
|
|
|
| |
IMPORTANT!
–If your TV only has a single Antenna In jack (or labeled as 75 ohm or RF In,) you will need an RF modulator in order to view the DVD playback on the TV. See your electronics retailer or contact Philips for details on RF modulator availability and operations.
Using an accessory RF modulator
1Use the composite video cable (yellow) to connect the DVD player’s CVBS (VIDEO OUT) jack to the video input jack on the RF modulator.
2Use the RF coaxial cable (not supplied) to connect the RF modulator to your TV’s RF jack.
After everything is connected properly, plug in the AC power cord to the power outlet.
Never make or change any connections with the power switched on.
When no disc is loaded, press
STANDBY ON on the DVD Player front panel,
“NO DISC” may appear on the display panel.
NO DISC
10
10 | 07/07/06, 10:34 AM |