DVD Menu Options (continued)
DPress S T to highlight one of the following options.
BRIGHTNESS
Increase the value to brighten the picture or vice versa. Choose zero (0) for average setting.
CONTRAST
Increase the value to sharpen the picture or vice versa. Choose zero (0) to balance the contrast.
TINT
Increase the value to darken the picture or vice versa. Choose zero (0) for average setting.
COLOR
Increase the value to enhance the colour in your picture or vice versa. Choose zero (0) to balance the colour.
EPress W X to adjust the setting that best suits your personal preference.
FRepeat steps D~E for adjusting other color features.
GPress OK to confirm.
Component
This setting allows you to toggle the output of the video signal between RGB (on scart) and Interlaced YPbPr.
AIn ‘Video Setup Page’, press S T to select { Component }, then press X.
{Interlaced }
Select this for Interlaced YPbPr connection.
{RGB }
Select this for scart connection.
BUse S T to select a setting and press OK to confirm.
Warning:
When the DVD player is set to Interlaced YPbPr, some TV may not properly synchronise with the player on the SCART connector.
English
TIPS: The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
41