Philips DVP5160 user manual Troubleshooting, Problem Solution

Page 48

English

Troubleshooting

WARNING

Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock.

If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help.

Problem

Solution

No power.

Remote control does not work.

No picture.

The picture is distorted or black & white during playback.

No sound.

Disc does not play.

The aspect ratio of the screen cannot be changed.

Press STANDBY-ON button on the front of the DVD player to turn on the system.

Make sure the AC outlet has power.

Aim the remote control directly at the sensor on the front of the DVD player (not towards TV).

Remove any obstacles between DVD player and the remote control.

Batteries are weak, replace the batteries.

Check the polarities of the batteries are as indicated on the remote control (± signs).

Turn on your TV and set to the correct Video In channel for the DVD player. You may go to Channel 1 on your TV, then press the channel down button on your TV’s remote control until you see the TV program.

Check the video connection between the DVD player and the TV.

The disc does not match with the TV color system standard (PAL/NTSC).

The disc is dirty, clean the disc.

Sometimes a small amount of picture distortion may appear. This is not a malfunction.

To deactivate progressive scan function manually;

1)Turn off your TV progressive scan mode (or set to interlaced mode)

2)Press OPEN/CLOSE to open the DVD player disc tray.

3)Press the alphanumeric keypad ‘1’ for few seconds.

Check the audio connections, the red and white jacks are connected correctly.

Set the Digital output correctly, based on the equipment you connected to the DVD player.

Insert the disc with the label facing up.

Wrong region code.

Wrong disc type. Read chapter “Playback from Disc - Playable discs” for details.

Make sure the disc is not scratched or warped. Clean the disc or replace a new one.

Check if the disc is defective by trying another disc.

The aspect ratio is fixed on the DVD disc.

Depending on the TV, it may not be possible to change the aspect ratio.

48

01-51_dvp5160_12_eng2.indd 48

2007-03-30 4:07:16 PM

Image 48
Contents Need help fast? 01-51dvp516012eng2.indd 2007-03-30 40703 PM Index Nederlands Deutsch Español Français EnglishGeneral Information EnglishPictures shown maybe different between countries For Customer UseLanguage Code Contents DVD Menu Options OthersCare and Safety Information SetupCleaning discs Accessories supplied Remote control and two AAA batteriesRegion codes Connecting to television Using Scart socketsUsing Composite Video sockets Cvbs ConnectionsUsing Component Video sockets YPbPr Using an accessory RF modulator Connecting the power cord When no disc is loaded, pressOptional connections Connecting a USB Flash Drive or USB mass storage device Using USB portProduct Overview Front and Rear PanelsRemote Control Prev íPLAY/PAUSE Next ëUsing the remote control to operate the system Getting StartedInserting Batteries Finding your viewing channelBefore you start To deactivate Progressive Scan manuallySelect Component to Interlaced , then OK to confirm To reset to previous TV colour system Selecting the matching colour systemPAL NtscSetting the language On-screen display OSD languageAudio, Subtitle and Disc menu languages Playback from Disc Playable discsSupported formats Playback Features Pausing playbackStarting disc playback Basic playback controls Selecting title/chapter/trackOperations for video playback Repeat play mode Selecting various repeat functionsRepeating a section within a chapter/track Viewing the disc playback information Viewing Audio CD playback information For VCD/SVCDPreview Disc Go To / Track Go To / Track SelectionSpecial DVD Features Special VCD and Svcd FeaturePlaying a DivX disc Copy protected contents are not playable USB mass storage deviceCompatibility of USB device Playing from USB flash drive or USB memory card reader Transfer of music files from PC to a USB mass storage devicePlaying MP3/WMA/JPEG Picture CD General OperationPlayback selection Playback with multi-angles Jpeg Preview Function JpegZoom picture Jpeg Playing MP3/WMA music and Jpeg picture simultaneouslyUsing the General setup menu DVD Menu OptionsLocking/Unlocking the disc for viewing OSD LanguageSleep DivX VOD registration code MinsOff Using the Audio setup menu Digital Audio SetupAnalog Output Sound Mode CD Upsampling Night Mode turning on/off English Select this to disable CD Upsampling88.2 kHz 176.4 kHzUsing the Video setup menu Setting the TV DisplayTV Type Trimmed or formatted on the TV screenProgressive Picture Setting English StandardVivid CoolPress S T to highlight one of the following options ComponentInterlaced Select this for Interlaced YPbPr connectionUsing the Preference setup menu Subtitle/Audio/Disc MenuParental Use S T to select a rating level and press OK to confirmMP3/JPEG Menu Change Central EuropeanCyrillic Restoring to the original settings ResetSoftware upgrade Power supply must not be interrupted during upgradePress numeric keypad ‘55’ on the remote control OthersSpecifications Video PerformanceTroubleshooting Problem SolutionEnglish Frequently Asked Questions USB What happens when I plug in a USB HDD?Why can’t I rotate the pictures in my device? What types of file does the player support?Glossary