Philips DVP5142 user manual Troubleshooting, Problem Solution

Page 42

E n g l i s h

Troubleshooting

WARNING

Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock.

If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help.

Problem

Solution

No power

–

Check if the AC power cord is properly connected.

 

–

Press the STANDBY ON on the front of the DVD

 

 

system to turn on the power.

No picture

–

Refer to your TV’s manual for correct Video In

 

 

channel selection. Change the TV channel until you

 

 

see the DVD screen.

 

–

Check if the TV is switched on.

 

–

If the progressive scan feature is activated but the

 

 

connected TV does not support progressive signals

 

 

or the cables are not connected accordingly, see

 

 

page 18 for proper progressive scan set up or

 

 

deactivate the progressive scan feature as below:

 

1) Turn off your TV progressive scan mode or turn on

 

 

to interlaced mode.

 

2) Press OPEN/CLOSE to open the disc tray.

 

3) Press numeric keypad ‘1’ on the remote control for

 

 

few seconds.

Distorted picture

–

Sometimes a small amount of picture distortion may

 

 

appear depending on the disc being played back.This

 

 

is not a malfunction.

Completely distorted picture or

–

Connect DVD Player directly to the TV.

black/white picture with DVD

–

Make sure the disc is compatible with the DVD/

 

 

Player.

 

– Ensure that the DVD Player’s TV Type is set to match

 

 

that of the Disc and your TV.

No sound or distorted sound

–

Adjust the volume.

 

–

Check that the speakers are connected correctly.

No audio at digital output

–

Check the digital connections.

 

–

Check if your receiver can decode MPEG-2 and if

 

 

not, please make sure the digital output is set to

 

 

PCM.

 

–

Check if the audio format of the selected audio

 

 

language matches your receiver capabilities.

No sound and picture

–

Check that the RGB/SCART cable is connected to

 

 

the correct device (See Connecting TV).

Visit us at www.philips.com/support for service support

42

001-45 DVP5140_Eng_02RC5

42

09/10/06, 11:10 AM

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Need help fast? Important notes for users in the U.K Mains plugPage Varoitus Index Nederlands Deutsch Español Français EnglishEnvironmental Information Laser safetyGeneral Information LaserLanguage Code Contents Troubleshooting DVD Menu OptionsSetup Supplied accessoriesCleaning discs IntroductionUsing Scart jack Using Composite Video jacks CvbsConnections Using Component Video jacks Y Pb Pr Using an accessory RF modulatorConnecting the power cord When no disc is loaded, pressAudio System Receiver Optional Connecting to anOptional Connecting Digital AV Receiver has a PCM, Dolby Digital, or MPEG2 decoderFunctional Overview Front and Rear PanelsRemote Control Using the Remote Control to operate the Player Inserting batteries into the Remote ControlSetting up the TV Getting StartedBelow menu appears on the TV Press 1 to highlightTo deactivate Progressive manually To reset to default TV colour system manually Selecting the colour system that corresponds to your TVSetting language preference Setting the OSD LanguageSetting the Audio, Subtitle and Disc menu language Region Codes Disc OperationsPlayable Discs Your DVD Player will playBasic playback controls Pausing playbackPlaying discs Selecting track/chapterStopç Repeat play modeSelecting various repeat/shuffle functions Repeating a section within a chapter/trackOperations for video playback DVD/VCD/SVCD Time Search Using the OSD menuOSD On-Screen Display DVD/ VCD/SVCD Title/Chapter/Track selectionPreview Function Audio/SubtitleAngle Use the numeric keypad 0-9 to key in a valid numberSpecial DVD Features Special VCD & Svcd FeaturesPlaying a DivX disc Playback selection Playing MP3/WMA/JPEG/Kodak Picture CDGeneral Operation Zoom picture JpegPlaying MP3/WMA music and Jpeg picture simultaneously Preview Function JpegPress Disc Menu to return to Picture CD menu To quit simultaneous playback, press ÇLock DVD Setup Menu OptionsGeneral Setup menu UnlockTo exit programme playback DivXR VOD registration codeTo start programme playback OSD LanguageAnalog Output Audio Setup MenuDigital Audio Setup LT/RTSound Mode CD Upsampling OFFVideo Setup Menu Night Mode turning on/offTV Type Setting the TV Display Progressive turning on/off Picture to be trimmed or formatted to fit your TV screenCool StandardVivid PersonalSelect this for Y Pb Pr connection Switching the YUV/RGBYUV RGBRestricting playback by Parental Control Rating explanationsMP3/JPEG Menu turning on/off Changing the PasswordWhen doing this for the first time, key in ‘136900’ Without MenuStandard Setting the DivX Subtitle fontRestoring to original settings CyrillicTroubleshooting Problem SolutionDisc can’t be played Specifications Video FormatGlossary

DVP5142 specifications

The Philips DVP5142 is a versatile and user-friendly DVD player that caters to a broad range of home entertainment needs. Known for its reliability and quality playback, this device has captured the attention of movie enthusiasts and casual viewers alike.

One of the standout features of the DVP5142 is its ability to play various disc formats, including DVD, VCD, and CD, allowing users to enjoy a wide array of media collections without compatibility concerns. The system supports multiple audio formats, enabling playback of MP3, WMA, and DivX files, which adds to its versatility as a multimedia player. This means that users can easily enjoy their favorite music and videos directly from their discs or USB drives.

The DVP5142 employs advanced technologies that enhance the viewing experience. The built-in Progressive Scan feature significantly improves picture quality by providing sharper images with less motion blur, which is particularly noticeable when watching fast-paced action scenes. This technology ensures that every movie night is an enjoyable experience, providing a theater-like quality at home.

In addition to its impressive video capabilities, the Philips DVP5142 includes a user-friendly interface that simplifies navigation. The menu layout is straightforward, making it easy for users to find and access their items without unnecessary complications. It also comes with a comprehensive remote control that allows users to manage playback options comfortably from their couch.

Another noteworthy characteristic of the DVP5142 is its support for various video formats, including DivX, which is critical for viewing downloaded high-quality movies directly on the TV. This compatibility expands the possibilities for entertainment, as users can enjoy a wider selection of content than ever before.

The robust build quality of the DVP5142 ensures long-lasting performance, making it a reliable addition to any home theater setup. Additionally, it can be easily integrated into existing entertainment systems, thanks to its standard AV outputs and component video connections.

In conclusion, the Philips DVP5142 is a feature-rich DVD player that combines compatibility, ease of use, and advanced playback technologies. It offers quality audio and video performance, making it an excellent choice for anyone looking to enhance their home entertainment experience. With its extensive format support and user-friendly design, it remains a strong player in the world of home media players.
Top Page Image Contents