Philips DVP5100/04 user manual Optional Connecting to an Audio System

Connections

English

Optional: Connecting to an Audio System

STEREO

AUDIO

IN

DIGITAL

Optional: Connecting Digital AV Receiver

AV Receiver

AUDIO

IN

DIGITAL

Stereo system has Dolby Pro Logic or Right / Left Audio In jack

1Select one of the video connections (CVBS VIDEO IN, SCART or COMPONENT VIDEO IN) depending on the options available on your TV.

2Use the audio cables (white/red) to connect AUDIO OUT (L/R) jacks of the DVD Player to the corresponding AUDIO IN jacks on the stereo system (cable not supplied).

Receiver has a PCM, Dolby Digital, or MPEG2 decoder

1Select one of the video connections (CVBS VIDEO IN, SCART or COMPONENT VIDEO IN) depending on the options available on your TV.

2Connect the COAXIAL jack of the DVD Player to the corresponding Digital Audio In jack on your Receiver (cable not supplied).

3Set the DVD Player’s Digital Output to PCM-ONLY or ALL depending on the capabilities of your Receiver (see page 28 “Digital Output”).

Helpful Hint:

–If the audio format of the Digital Output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all.

12

01-39 DVP5100_EU_04	12	3139 246 15651
		17/03/05, 12:43 PM