Philips DVP5100/02 user manual Brightness, Contrast, Tint, Colour, Yuv, Rgb

DVD Setup Menu Options

E n g l i s h

3If you select {PERSONAL}, then proceed to steps 4~7.

➜ The ‘PERSONAL PICTURE SETUP’ menu appears.

Personal Picture Setup

Brightness	0
Contrast
		0
TINT
		0
COLOR
		0

4Press 3 4 to highlight one of the following options.

BRIGHTNESS

Increase the value will brighten the picture or vice versa. Choose zero (0) for average setting.

CONTRAST

Increase the value will sharpen the picture or vice versa. Choose zero (0) to balance the contrast.

TINT

Increase the value will darken the picture or vice versa. Choose zero (0) for average setting.

COLOUR

Increase the value will enhance the colour in your picture or vice versa. Choose zero

(0) to balance the colour.

5Press 1 2 to adjust the setting that best suit your personal preference.

6Repeat steps 4~5 for adjusting other colour features.

7Press OK to confirm.

Switching the YUV/RGB

This setting allows you to toggle the output of the video signal between RGB (on scart) and Y Pb Pr (YUV).

1In ‘VIDEO SETUP PAGE’, press 3 4 to highlight {COMPONENT}, then press 2.

YUV

Select this for Y Pb Pr connection.

RGB

Select this for Scart connection.

2Press 3 4 to select a setting, then press OK to confirm your selection.

Warning:

When the player is set to Y Pb Pr (YUV), some TV may not properly synchronise with player on the SCART connector.

TIPS: To return to the previous menu, press 1.

To remove the menu, press SYSTEM MENU.

32

01-39 DVP5100_EU_02A	32	3139 246 15661
		17/03/05, 10:54 AM