Philips DVP3880K user manual Audio setup

English

Audio setup

General	Analogue Output	Stereo
	Digital Audio
Video	HDMI Audio	On
	Audio Sync
Audio	Volume
	Sound Mode
Preference	Night Mode	Off

[Analogue Output] - Adjust this setting for audio output through AUDIO OUT L/R .

•[Stereo] - Compress multi-channel Dolby digital sound to stereophonic sound.

•[LT/RT] - Compress multi-channel Dolby digital sound to 2-channel surround sound.

[Digital Audio] - Adjust this setting for audio output through COAXIAL/DIGITAL OUT.

•[Digital Output] - Select a type of digital output.

•[Off] - Disable digital output.

•[All] - Support multi-channel audio formats.

•[PCM Only] - Downmix to two-channel audio signal.

•[LPCM Output] - Select the LPCM (Linear Pulse Code Modulation) output sampling rate.

Note

•[LPCM Output] setting is changeable only when [Digital Output] is set as [PCM Only].

•The higher the sampling rate, the better the sound quality.

[HDMI Audio] - Enable or disable the audio output through HDMI cable.

[Audio Sync] - Set a delay time for audio output when you play a video disc.

[Volume] - Set the default volume level.

[Sound Mode] - Select a preset sound effect.

[Night Mode] - Equalize loud sound and soft sound. Enable this feature to watch DVD movies at a low volume at night.

Note

•Applicable to Dolby Digital encoded DVD discs only.

EN 19