Change the password

Setup

Note

•To play a DVD disc that has a rating level higher than your setting, enter the password ﬁrst. (Refer to “Setup” > “General setup” > “Play a locked disc” for details)

•The rating levels are country-dependent. To allow all discs to be played, select [8 Adult].

•Some discs have ratings printed on but are not recorded with ratings. This function has no effect on such discs.

[PBC] - Enable or disable the PBC (playback control) feature.

[Password] - Change the password for playing discs that are locked or restricted with rating levels.

1 Select [Preference] > [Password] > [Change], and then press OK.

»The interface for changing password is displayed.

2 Press OK again.

» “0” is displayed behind [Old Password] as the ﬁrst digit of old password.

Press / to set a value (0-9) to the ﬁrst digit. Press .

Repeat steps 3 and 4 to enter the 6-digit old password.

Repeat steps 3 and 4 to enter the new password behind [New Password]. Repeat steps 3 and 4 to enter the new password behind [Conﬁrm PWD].

Note

•If you forget the password, enter “136900” before you set a new password.

[DivX Subtitle] - Select a character set that supports the subtitle of your DivX video.

[Version Info] - Display the information about software version of this player.

[Default] - Reset all settings to factory default, except for the settings for [Disc Lock], [Parental Control], and [Password].

18EN