Audio setup
Audio Setup |
Analogue Output |
Digital Audio |
Volume |
Sound Mode |
CD Upsampling |
Night Mode |
1Press SETUP.
» [General Setup] menu is displayed.
2Press 
to select [Audio Setup], and then press 
to enter the submenu.
3Select an option, and then press OK.
4Select a setting, and then press OK.
•To return to the previous menu, press
BACK .
•To exit the menu, press SETUP. [Analogue Output]
Select an analogue setting based on the audio device that is connected through the analogue audio jack.
• [LT/RT] - For the surround sound output through two speakers.
• [Stereo] - For the stereo output. [Digital Audio]
Select a digital setting based on the digital amplifier/ receiver that is connected through the digital jack (coaxial/digital).
• [Digital Output] - Select a type of digital output.
•[All] - Support
•[Off] - Disable digital output.
•[PCM Only] - Downmix to
•[LPCM Output] - Select the LPCM (Linear Pulse Code Modulation) output sampling rate.
•[48kHZ] - For discs recorded at sampling rate of 48 kHz.
•[96kHZ] - For discs recorded at sampling rate of 96 kHz.
Note
•[LPCM Output] setting is only available if the [Digital Output] is set to [PCM Only].
•The higher the sampling rate, the better the sound quality.
[Volume]
Set the default volume level when you play a disc.
1. Press OK. |
| English | ||
2. | Press | to set the volume. | ||
| ||||
3. | Press OK to confirm and exit. |
| ||
[Sound Mode]
Select a preset sound effect to enhance the audio output.
•[3D] - Select a virtual surround sound effect that is produced from the left and right audio channels.
•[Movie Mode] - Select a sound effect for movies.
•[Music Mode] - Select a sound effect for music.
[CD Upsampling]
For better sound quality in stereo mode, convert the music CD to a higher sampling rate.
•[Off] - Turn off
•[88.2kHz] - Convert to twice the original sampling rate.
•[176.4kHz] - Convert to four times the original sampling rate.
[Night Mode]
Make loud sound level softer and soft sound level louder so that you can watch the DVD movies at a low volume, without disturbing others.
•[On] - Enjoy quiet viewing at night.
•[Off] - Enjoy surround sound with a full dynamic range.
Note
•Applicable only to Dolby Digital encoded DVDs.
Video setup
1Press SETUP.
» [General Setup] menu is displayed.
EN 12