Philips DVP3350V/05 user manual Before Operation VCR part, Tuning in a video channel on your

Page 12
Press 1on the remote control to enter the standby mode (the clock indicator will be dimmed).
Press and hold CHANNEL 3 or 4 on the DVD+
VCR for more than 4 secs.

Before Operation - VCR part

Tuning in a video channel on your

TV

Video channel (RF output channel) is the channel on which your TV receives picture and sound signals from the DVD+VCR through the RF cable.

If you have used a SCART lead you will not have to tune your TV, simply select the AV channel.The AV channel is already pre-tuned for optimum video playback on your TV.

Perform the following steps only if interference appears in the TV picture after you have moved to a different area or a new station has started broadcasting in your area, or if you change the connection from RF connection to AV connection, or vise versa.

1 Turn on DVD+VCR and TV.

2 Set the vacant position 36 on your TV.

3

4

RF 36 will appear in the DVD+VCR display.

The following picture will be displayed on the TV screen.

RF CHANNEL

36

If the picture is snowy, move to step 5. If the picture is clean, press 1 on the DVD+VCR to finish.

5 Press CHANNEL 3 or 4 on the DVD+VCR to set the video channel to a vacant position between 22 and 68 which is not occupied by any local station in your area.

Note

The RF channel will not change until step 6 has been executed.

6 Press 1to store the new RF video channel into the DVD+VCR memory.

Now tune your TV set to the new DVD+VCR RF channel.

Note

If the TV picture was clear in step 4, do not retune your TV.

Using your DVD+VCR for the very first time

For the following steps we assume that you have just connected your DVD+VCR for the very first time.

To make tuning TV stations an easy task your DVD+VCR incorporates the Automatic Channel Memory System (ACMS).This system will automatically tune, store TV channels and set the clock (date & time) in your DVD+VCR.

1 Make sure that you have correctly installed your DVD+VCR.

Press 1 to turn on your DVD+VCR.

If the initial Menu Screen doesn’t appear on screen, make sure that you have tuned your TV to a video channel. Or if this is correct it may mean that your DVD+VCR is already tuned.

 

ACMS

Pr-12

OK i

ACMS

2 Press OK to start the automatic tuning process.

01

C02

00

BBC1

02

C03

00

BBC2

03

C04

00

ITV

 

 

S

 

 

 

 

E

 

 

 

 

 

 

 

 

 

Pr-12

 

 

 

 

 

ACMS

 

 

 

 

i

Programme number

TV Station

PR01

 

 

BBC1

 

 

PR02

 

 

BBC2

 

 

PR03

 

 

ITV

 

 

PR04

 

 

CH4

 

 

PR05

 

 

CH5

 

 

PR06

 

 

Satellite

The TV station shown above may vary according to the area you live in.

3 Press SETUP to remove the menus from the TV screen.

12

Image 12
Contents DVD Video Player Register your product and get support atSafety Precautions FeaturesHow to connect a plug Mains plugContents Remote Control Operation Range Before UsePlayable Discs Precautions About SymbolsBefore Use Cont’d Selecting the Viewing SourceFront Panel and Display Window EjectChannel 3 Remote Control Rear Panel VIDEO/AUDIO OUTLeft/Right DVD/VCR OUTCoaxial Digital audio out jack DVD Exclusive OUT Connecting to a TV & Decoder ConnectionsConnecting to Optional Equipment Connections Cont’dDigital Multi-channel sound Tuning in a video channel on your Before Operation VCR partSetting the clock Manually Press Setup Press b or B to select SET. Press OKPress Setup to remove the menus from the TV screen To set the colour systemHow to using the main menu Tuning in TV Stations AutomaticallyPress Setup to return to a TV picture 169/43 To select the aspect ratio of your TV see pTuning in TV Stations Manually Press SetupPress 1 or 2 to select the PR SET Press OK Want to tune for example, PRChanging the order of TV Stations Deleting TV StationsBefore Operation DVD part General ExplanationInitial Settings DisplayLanguage Audio OthersLock Parental Control Rating DVD Select Rating on the Lock menu then pressIf you forget your Security Code Area Code DVDOperation with tape Playing a tapeAuto Tracking SkipInstant Timer Recording ITR Press Power 1 to end recording Video Plus+ ProgrammingPress Video PLUS+ If you make a mistake press 1 then enter the revised numberTimer recording using On Screen Display General Features Operation with DVD and Video CDPlaying a DVD and Video CD DVD Video Discs Repeat Chapter/Title/Off Video CDs, Repeat Track/All/OffScreen Saver Special DVD Features DVD Operation with Audio and MP3/Windows MediaTM Audio Disc Audio CDMP3/Windows MediaTM Audio ID3 TAGPause PAUSE/STEP againRepeat A-B again Search CD MP3Operation with Jpeg Disc Viewing a Jpeg disc JpegProgrammed Playback CD VCD2.0 VCD1.1 MP3 Erasing a Track from Program ListErasing the Complete Program List Audio CD menu MP3/Windows Media TM Audio menu PressMaintenance and Service Operation with DVD VR Disc DVDPlaying a DVD VR format Disc Operation with DivX Disc DivX Playing a DivX Movie DiscPlayable DivX file Playable Subtitle formatAdditional Operation On Screen DisplayTape Counter Memory Stop Video Doctor Self-DiagnosisHi-Fi Stereo Sound System Wide Screen CompatibilityTo set the decoder Last Condition Memory DVD CDSpecial Recording Copying from DVD To VCRRecording from another video recorder Symptom Cause Correction Language Code List Code LanguageCountry/Area Code List Code Country/AreaSpecification Philips Service Service ConsommateursPhilips Consumer Services Philips Norge AS