Connect audio cables
Connect the audio from this product to the TV to allow sound output through the TV.
AUDIO IN
1Connect the audio cables (not supplied) to:
•the AUDIO OUT L/R jacks on this product.
•the audio input jacks on the TV.
Route audio to other devices
Route the audio from this product to other devices to enhance audio play.
Connect to digital amplifi er/receiver
DIGITAL IN
DIGITAL
OUT
COAXIAL
1Connect a coaxial cable (not supplied) to:
•the COAXIAL jack on this product.
•the COAXIAL/DIGITAL input jack on the device.
Connect analogue stereo system
AUDIO IN
1Connect the audio cables (not supplied) to:
•the AUDIO OUT L/R jacks on this product.
•the audio input jacks on the device.
Tip
•You can optimise the audio output (see ‘Adjust settings’ > [Audio Setup] > [Analogue Output]) for details.
Connect USB fl ash drive
1Connect a USB fl ash drive to the 
jack on this product.
Note
•This product can only play/view MP3, WMA, DivX or JPEG fi les that are stored on a USB fl ash drive.
•Press the 
button to access the content and play the fi les.
Connect power
Caution
•Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back of the product.
•Before connecting the AC power cord, ensure you have completed all other connections.
Note
•The type plate is located on the back of the product.
1 Connect the AC power cable to the wall
socket.
» The product is ready to be set up for use.
4 Get started
Prepare the remote control
1Open the battery compartment.
2Insert 2 AAA batteries with correct polarity
8EN