Philips DVP3336X/94 user manual Turn on progressive scan, Press Setup to exit the menu

Page 11

Turn on progressive scan

Note

To use the progressive scan feature, you must connect a progressive scan TV with the component video jacks (see “Connect” > “Connect video cables” > “Option 1: Connect to the component video jacks” for details).

Video Steup
TV System	On
TV Display	Off
Progressive
Picture Setting

1Turn on the TV to the correct viewing channel for this product.

2Press SETUP.

3Press to select [Video Setup].

4Select [Progressive] > [On], then press

OK.

» A warning message is displayed.

5To proceed, select [Ok] and press OK. » The progressive setup is complete.

Note

If a blank/distorted screen is displayed, wait for 15 seconds for the auto recovery.

If no picture is displayed, turn off the progressive scan mode as follows:

1) Press to open the disc compartment.

2) Press the Numeric button ‘1’.

6Press SETUP to exit the menu.

7You can now turn on the progressive scan mode on the TV (see the TV user manual).

Note

During play, when the progressive scan mode is on for both this product and the TV, distorted picture may display. In this case, turn off the progressive scan feature on both this product and the TV.

12EN

Image 11

Contents Register your product and get support at DVP3336 Contents Consumers should note that not all high Safety and important noticeAbout Progressive Scan Disposal of your old product and batteriesPlay DivX video with menus, subtitles and audio tracks Trademark noticeCopyright notice Region codes Feature highlightsYour product Product overviewYLHZRISKRWRÀOHV Remote controlSetup ‡ Access or exit the setup menu Make the following connections to use this product ConnectConnect video cables Option 1 Connect to component video jacksConnect multi channel receiver Connect audio cablesOption 2 Connect to video Cvbs JackOn this product Connect powerConnect analogue stereo system Press to turn on this product Prepare the remote control Find the correct viewing channelGet started Select menu display languageTurn on progressive scan Press Setup to exit the menuControl video play PlayPlay a disc Play videoDisplay play time Access DVD menuAccessVCD menu Preview disc contentsQuick skip play Play musicPlay DivX video Control a trackPlay musical slideshow Play photoPlay photo as slideshow Control photo playÀOHWRSOD\ 3OD\IURP86%ÁDVKGULYHProgram radio stations manually Select a preset radio stationListen to FM radio Tune to a radio station‡ To exit the menu, select Exit, then press OK Insert an audio CDSpeed Select a copying speed Bitrate Select a quality level CRT ID3 Copy track information into the 03ÀOHAudio setup Adjust settingsGeneral setup Off No speaker is connected ‡ Subwoofer LargeBelow 120 Hz Small Cannot produce lowVideo setup PBC Picture SettingPreferences Version Info Display the software version of this product PWDÀHOGPress OK to exit the menu Care Update softwarePress Setup Select Preferences Version Info, then press OK Clean discs‡ Mpeg 2 DVD/SVCD SpecificationsUSB DVHUVSHFLÀFDWLRQ Sound TroubleshootingMain unit Picture‡ 7KHGULYHLVIRUPDWWHGZLWKDÀOHV\VWHP PlayLYYLGHRÀOHVFDQQRWEHSOD\HG WMA GlossaryJpeg MP3Language Code GSM / WLL