Video setup

3Press OKWRFRQÀUPDQGH[LW

[Speakers Delay] – Sets the delay time for the center and rear speakers if they are placed closer to the listening position, so that the sound output from all speakers reach the listening position at the same time.

1Press OK.

2 Select a speaker, then press	to set the
delay time.

3Press OKWRFRQÀUPDQGH[LW

[CD Upsampling]

For better sound quality in stereo mode, convert the music CD to a higher sampling rate.

[Off] - Turn off CD-upsampling.

[88.2kHz (X2)] - Convert to twice the original sampling rate.

[176.4kHz(X4)] - Convert to four times the original sampling rate.

[Night Mode]

Make loud sound level softer and soft sound level louder so that you can watch the DVD movies at a low volume, without disturbing others.

[On] – Enjoy quiet viewing at night.

[Off] – Enjoy surround sound with a full dynamic range.

Note

Applicable only to Dolby Digital encoded DVD.

Video Steup

TV System

TV Display

Progressive

Picture Setting

1Press SETUP.

» [General Setup] menu is displayed.

2Pressto select [Video Setup], then press .

3Select an option, then press OK.

4Select a setting, then press OK.

To return to the previous menu, press .

To exit the menu, press SETUP. [TV System]

Change this setting if the video does not appear correctly. By default, this setting matches the most common setting for TVs in your country.

[PAL] - For PAL-system TV.

[Multi] - For TV that is compatible with both PAL and NTSC.

[NTSC] - For NTSC-system TV. [TV Display]

Select a display format:

[4:3 Pan Scan] - For 4:3 screen TV: full- height display with the trimmed sides.

[4:3 Letter Box] - For 4:3 screen TV: wide-screen display with black bars on the top and bottom of the screen.

[16:9] - For wide-screen TV: display ratio 16:9.

22EN