Philips DVP3111/79 user manual Get started, Prepare the remote control, Turn on progressive scan

Page 7

4 Get started

Prepare the remote control

1Open the battery compartment.

2Insert two R03 or AAA batteries with correct polarity (+/-) as indicated.

3Close the battery compartment.

Caution

Remove batteries if they are exhausted or if the remote control is not to be used for a long time.

Do not mix batteries (old and new or carbon and alkaline, etc.).

Batteries contain chemical substances, so they should be disposed of properly.

The language options may vary from different regions.

3Press to select a language, then press OK.

Turn on progressive scan

Note

To use the progressive scan feature, you must connect a progressive scan TV with the component video jacks (see “Connect” > “Connect video cables” > “Option 1: Connect to the component video jacks” for details).

Video Setup

 

TV System

 

 

 

 

 

 

 

 

 

 

On

 

 

TV Display

 

 

 

Off

 

 

Progressive

 

 

 

 

 

 

 

Picture Setting

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Find the correct viewing channel

1Press to turn on this product.

2Turn on the TV and switch to the correct video-in channel. (Refer to the TV user manual on how to select the correct channel.)

Select menu display language

1Press SETUP.

» [General Setup] menu is displayed.

2Select [OSD language], then press.

General Setup

1Turn on the TV to the correct viewing channel for this product.

2Press SETUP.

3Press to select [Video Setup].

4Select [Progressive] > [On], then press OK. » A warning message is displayed.

5To proceed, select [Ok] and press OK. » The progressive setup is complete.

Note

If a blank/distorted screen is displayed, wait for 15

 

seconds for the auto recovery.

If no picture is displayed, turn off the progressive scan

 

mode as follows:

Disc Lock

OSD Language

Sleep Timer

Auto Standby

DivX(R) VOD Code

English

Melayu

1) Press to open the disc compartment.

2) Press the Numeric button ‘1’.

6Press SETUP to exit the menu.

7You can now turn on the progressive scan mode on the TV (see the TV user manual).

Note

During play, when the progressive scan mode is on for both this product and the TV, distorted picture may display. In this case, turn off the progressive scan feature on both this product and the TV.

8EN

Image 7
Contents Register your product and get support at Contenido Disposal of your old product and batteries Safety and important noticeTrademark notice About Progressive ScanYour DVD player Feature highlightsProduct overview Option 2 Connect to video Cvbs jack for a standard TV ConnectConnect video cables Option 1 Connect to component video jacksConnect audio cables Connect powerRoute audio to other devices Find the correct viewing channel Prepare the remote controlGet started Turn on progressive scanPlay a disc PlayPlay video Play music Play photo General setup Adjust settingsAudio setup Video setup PBC PreferencesCare Additional informationSpecifi cations Play TroubleshootingPicture SoundAspect ratio GlossaryProgressive scan 18 EN Language CodePhilips Consumer Electronics Warranty Policy for Australia 20 EN