6 Adjust settings
Note
If the setup option is grayed out, it means the setting cannot be changed at the current state.
General setup
1Press SETUP.
» [General Setup] menu is displayed.
2Press 
.
3Select an option, then press OK.
4Select a setting, then press OK.
To return to the previous menu, press 
. To exit the menu, press SETUP.
[Disc Lock]
Set play restriction for a disc which is loaded in the disc compartment (maximum 20 discs can be locked).
[Lock] - Restrict access to the current disc. The next time you want to play this disc or unlock it, you need to enter the password.
[Unlock] - Play all discs.
Tip
You can set or change the password, go to [Preferences] > [Password].
[OSD language]
Select an
[Sleep Timer]
Switch automatically to standby at the preset time. [Off] - Disable sleep mode.
[15 mins], [30 mins], [45 mins], [60 mins]
[Auto standby]
Turn on or off automatically standby.
[On] - Switch to standby 15 minutes of inactivity (for example, in pause or stop mode).
[Off] - Disable the auto standby mode.
Audio setup
1Press SETUP.
» [General Setup] menu is displayed.
2Press 
to select [Audio Setup], then press 
.
3Select an option, then press OK.
4Select a setting, then press OK.
To return to the previous menu, press 
. To exit the menu, press SETUP.
[Analogue Output]
Select an analogue setting based on the audio device that is connected through the analogue audio jack.
[Stereo] - For stereo output.
[LT/RT] - For surround sound output through two speakers.
[Digital Audio]
6HOHFWDGLJLWDOVHWWLQJEDVHGRQWKHGLJLWDODPSOLÀHU receiver that is connected through the digital jack (coaxial/digital).
[Digital Output] - Select a type of digital output.
[Off] - Disable digital output.
[All] - Support
[PCM Only] - Downmix to
[LPCM Output] - Select the LPCM (Linear Pulse Code Modulation) output sampling rate. [48kHz] - For discs recorded at sampling
rate of 48 kHz.
[96kHz] - For discs recorded at sampling rate of 96 kHz.
12EN