Philips DVP3007 user manual Sound and Volume Controls, Setting the speakers’ channels

Sound and Volume Controls

English

Setting the speakers’ channels

You can adjust the delay times (centre and surround only) and volume level for individual speakers. These adjustments let you optimise the sound according to your surroundings and setup.

IMPORTANT!

The speaker settings only available on Multi-channel audio outputs.

1Press STOP then, press SYSTEM MENU.

2Press 2 repeatedly to select {AUDIO SETUP PAGE}.

3Press 34 to highlight {SPEAKER SETUP}, then press 2.

- - Audio Setup Page - -

Analog Output

Digital Audio Setup

Sound Mode

Speaker Setup

CD Upsampling

Night Mode

- - Speaker Setup Page - -

Front Speakers	Large
Center Speaker	Small
Rear Speakers
Subwoofer
Speakers Volume
Speakers Delay

4Enter its submenu by pressing 2.

5Press 34 to highlight one of the options below at a time, then press 2.

{FRONT SPEAKERS, CENTER SPEAKER, REAR SPEAKERS}

OFF – when no speaker is connected. LARGE – when connected speakers can produce low frequency signals below 120Hz.

SMALL – when connected speakers cannot produce low frequency signals below 120Hz.

{SUBWOOFER}

ON – when a subwoofer is connected. OFF – when no subwoofer is connected.

{SPEAKER VOLUME} – Volume level setting for individual speakers (-6dB ~ +6dB).

- - Speakers Volume Setup - -
Front Left	0dB0
Front Right	0dB0
Center	0dB0
Subwoofer	0dB0
Rear Right	0dB0
Rear Left	0dB0

{SPEAKER DELAY} – Delay times setting in relation to the listening position/ distance for centre and surround speakers (1m ~ 10m).

- - Speakers Distance Setup - -
Center	1.0M
Subwoofer	1.0M
	1.0M
Rear Right
Rear Left	1.0M

6Press 1 2 to adjust the setting that best suit your surround sound needs.

7Press OK to confirm.

Helpful Hints:

–Use the longer delay time settings when the rear speakers are closer to the listener than the front speakers.

–The test tone will be automatically generated to help you judge the sound level of each speaker.

TIPS: To return to the previous menu, press 1.

To remove the menu, press SYSTEM MENU.

34

DVP3007_94(eng) 34 4/26/05, 11:05 AM