Philips DVP3007 user manual Optional Connecting to a Multi- channel Receiver

Connections

Optional: Connecting to a Multi- channel Receiver

AV Receiver	MULTICHANNEL AUDIO IN
	FRONT	REAR	CENTER
	R		R
	L		L
	FRONT	REAR	SUBW.

Optional: Connecting to an Audio System

STEREO

AUDIO

IN

DIGITAL

English

Receiver has a Dolby Digital decoder

1Select one of the video connections

(CVBS VIDEO IN, S-VIDEO IN, SCART or COMPONENT VIDEO IN) depending on the options available on your TV.

2Connect the Audio Out Left and Right jack for Front and Rear speakers to the corresponding input sockets on your Receiver (cable not supplied).

3Connect the Audio Out for Center speaker and Subwoofer to the corresponding inputs on your Receiver (cable not supplied).

4Set the DVD Player’s Analog Output to ‘Multichannel’ to enable playback of DVDs recorded in Multi-channel. (see page 26 “Setting the analogue output”).

Helpful Hint:

–If the subwoofer is equipped with its own amplifier, the Subwoofer connection should be connected directly to the subwoofer.

Stereo system has Dolby Pro Logic or Right / Left Audio In jack

1Select one of the video connections (CVBS VIDEO IN, SCART or COMPONENT VIDEO IN) depending on the options available on your TV.

2Use the audio cables (white/red) to connect [FRONT (L/R)] jacks of the DVD Player to the corresponding AUDIO IN jacks on the stereo system (cable supplied).

9

DVP3007_94(eng) 9 4/26/05, 11:05 AM