Philips DVDR3575H/37 To stop the timer recording in progress, Press Timer Check the information

	TIMER RECORDING
	How to select a channel number for the timer recording
Analog TV	For channel number 2-6 press, press [B] or [ • ] to decide the channels. For other channels (7-69),
	the channel will be decided as soon as you enter the channel number.
Analog CATV	For channel number 1-12 press, press [B] or [ • ] to decide the channels. For other channels (13-
	125), the channel will be decided as soon as you enter the channel number.
Digital TV	For channel number 1-9 press, press [B] or [ • ] to decide the channels. For other channels (10-99),
	the channel will be decided as soon as you enter the channel number.
Digital CATV	For channel number 1-13 press, press [B] or [ • ] to decide the channels. For other channels (14-
	135), the channel will be decided as soon as you enter the channel number.
minor channels	For channel number 1-9 press, press [B] or [ • ] to decide the channels. For other channels (10-99),
	the channel will be decided as soon as you enter the channel number.

<Hint>

•You can decide the 1-digit channel number by pressing 0 first , then enter desired 1-digit channel number. e.g.) “5”: [0]+[5]

•For selecting the channels with [K / L] you need to press [B] or [ • ] to decide the channel number.

•For selecting the minor channels with [K / L], please make sure the minor channel your are selecting is existed. [K / L] does not skip the non-existed minor channels.

Introduction Connections Basic Setup

To stop the timer recording in progress

Press [STOP C] to stop the timer recording in progress.

Checking, canceling, or correcting the timer programming information

1)Press [TIMER].

2)Check the information.

Timer Programming

FEB/20/07 10:30 AM 125.1 SP
SP (1:00)		MON FEB/19 11:30AM
Date	Start	End	CH
FEB/20	10:30AM 11:30AM		DTV125. 1
	New Program
			1/1

3-A) To delete the timer program:

1 Use [K / L] to select the program you want to delete, then press [OK].

2 Use [K / L] to select “Delete”, then press [OK].

Confirmation window will appear.

3 Use [K / L] to select “Yes”, then press [OK].

3-B) To correct the timer program:

1 Use [K / L] to select the program you want to correct, then press [OK].

2 Use [K / L] to select “Program Change”, then press [OK].

3 Correct the timer program by using [K / L / { / B], then press [OK].

4) Press [TIMER] to exit.

Note

•Press [TIMER] to check the timer recording in progress.

•As to the timer recording in progress (which is shown in red in the timer program list), you only can edit the end time. The changes made during recording will be recognized as only specific to that recording in progress and it will not affect the daily or the weekly recording setting.

If the timer program did not complete correctly, the error number appears in the timer pro- gramming list.

			Timer Programming
		FEB/20/07 10:30 AM 125.1 SP
		SP (1:00)				TUE FEB/20 1:00PM
				Date	Start	End	CH
		E41		FEB/20	10:30AM 11:30AM		DTV125. 1
					New Program
							1/1
Each error number means:
E1-22	Recording error other					E42	No disc when
E37-39	than below						recording
E24	Unrecordable disc					E43	Already 49 titles
							recorded
E25-26	Copy prohibited					E44	Already 254 chapters
	program						recorded
E29	Disc protected					E45	Copy prohibited
							program
E30	Disc full					E46	It is impossible to
E35	PCA full *1						record additionally
							on a disc recorded
E36	Already finalized						by other units
	video format disc						when setting “
							Make Recording
							Compatible” to “OFF”.
E40	Some portion has					E47	Already 600 titles
	not been recorded						recorded on the HDD
	because of program
	overlapping.					E49	HDD recording is
	Recording did not
							canceled due to the
	start at the start time.
							insufficiency of the
E41	Power failed
							disc space on the
							HDD.

•E23, E27, E28, E31, E32, E33 and E34 are not displayed.

•A program with the error number is grayed in the timer programming list.

•Timer program with an error number will be cleared

once the entry screen for the program is displayed.

*1 PCA is a disc's space reserved for recording test.

EN 45

Recording Playback

Editing Function Setup Others

E2H40UD_v4.indd 45

2008/06/02 13:35:14