Changing the 4-digit code
1When disc playback is stopped, select ACCESS CONTROL in the features menu using the w/v keys.
2Enter the old code.
3Move to CHANGE CODE using the w key.
4Press the u key.
5Enter the new
6Enter the code a second time and reconfirm by pressing OK.
7Press t to exit the menu.
Note: If you forget your 4 digit code, it can be cancelled by pressing 9 four times in the ‘Access Control’ dialog.You can then enter a new code (twice!) as described above.
Parental Control Disclaimer
This DVD player features the PARENTAL CONTROL system which is intended to activate when playing DVD discs furnished with certain software coding.This is according to technical standards adopted by the set maker and disc content industries.
Please note that the PARENTAL CONTROL system will not operate a DVD disc which is not furnished with the appropriate software coding. Also note that at the time of release of this DVD player, certain aspects of the technical standards had not been settled between set makers and the disc industries.
On this basis Philips cannot guarantee functioning of the PARENTAL CONTROL system and denies any liability associated with unintended watching of disc content.
If in doubt, please make sure the disc plays according to your PARENTAL CONTROL settings before you allow children access.