Philips DVD727/99 owner manual Turn on the TV. Set it to the correct Video In channel. See

Hookups (cont’d) 15

Connecting to a TV and a Stereo

(Stereo has Dolby DigitalTM or MPEG2)

1

Stereo

(example only)

Back of TV

(example only)

COAXIAL DIGITAL	VIDEO IN
AUDIO IN

2

3

Connect the Player’s COAXIAL jack or OPTICAL jack to
the Stereo’s COAXIAL DIGITAL AUDIO IN jack or
1 OPTICAL DIGITAL AUDIO IN jack. You only need to use one
of the jacks, not both.
Use an appropriate digital audio cable (not supplied). See your
electronics retailer for details and availability.
Connect the supplied video cable to the Player’s yellow
VIDEO (VIDEO OUT) jack and to the TV’s
2 VIDEO IN jack. The supplied video cable has yellow markings.
Plug the power cords of the DVD Player, Stereo, and TV
into an active power outlet. Press STANDBY-ON y on the
3 front of the DVD Player to turn it on.
Turn on the Stereo and set it to the correct Audio In
4 channeldetails.	or sound source. Refer to the Stereo owner’s manual for
Turn on the TV. Set it to the correct Video In channel. See
your TV owner’s manual for details. Or, go to your lowest TV
5 channel (01 or 02) and change channels downward until you see the
blue DVD screen on the TV.			Helpful Hints
		•	Set DIGITAL OUTPUT and
			LPCM OUTPUT accordingly.
			Details are on page 40.
		•	Your Stereo must support
			MPEG2 or Dolby DigitalTM.
			Check the Stereo’s manual.
		•	If you prefer or need to use the
			S-VIDEO or Y Pb Pr jacks
			instead, see pages 12-13.