NTSC/PAL Settings
You can switch the NTSC/PAL setting of the DVD player to match the video signal of your TV.This setting only affects the television’s
1Unplug the DVD player from the mains.
2Press and hold 9 and T on the front of the DVD player.While holding 9 and T plug in the mains.
3After PAL or NTSC appears on the display panel of the DVD player, release 9 and T at the same time.The PAL or NTSC that appears on the display panel indicates the current setting.
4To change the setting, press T within three seconds.The new setting (PAL or NTSC) will appear on the display panel.
General explanation
About this manual
This manual gives the basic instructions for operating this DVD player. Some DVDs require specific operation or allow only limited operation during playback. In these cases, the player may not respond to all operating commands.When this occurs, please refer to the instructions contained with the DVD. When the symbol Ä appears on the TV screen, the operation is not permitted by the player or the disc.
Remote control operation
-Unless otherwise stated, all operations can be carried out with the remote control.Always point the remote control directly at the player, making sure there are no obstructions in the path of the infrared beam.
When there are corresponding keys on the front panel of the player, they can also be used.
Menu bar operation
-A number of operations can be carried out via the menu bar on the screen. The menu bar can be accessed by pressing any of the following keys on the remote control: MENU
-The following functions are available via the menu bar: - V Personal Preferences
- W | Title/Track |
- X | Chapter/Index |
-Y Audio language
-Z Subtitle language
- } | Angle |
- a | Zoom |
- c | Video Program |
- d | Sound |
-e Picture by Picture
-f Slow motion
-g Fast motion
-h Time search
16PREPARATION