Philips MCD297/12 Setting the clock, Setting system menu options, Before using the remote control

Setting the clock

Important!

– To set clock in the Eco Power mode, press and hold ECO POWER/STANDBY ON on the set for 3 seconds

or more to switch to normal standby mode first before proceeding with the procedures below.

1

In standby mode, press and hold CLOCK on the system.

2

When the hour digits flash, turn the VOLUME -/+control on the front panel or press

VOL +/- on the remote to set the hours.

3

Press CLOCK again and the minute digits flash.Then turn the VOLUME -/+control on the front panel or press VOL +/- on the remote to set the minutes.

4

Press CLOCK again to confirm the time setting.

Before using the remote control

1 Pull out the plastic protective sheet.

2 Select the source you wish to control by pressing one of the source select keys on the remote control (for example CD,TUNER).

3 Then select the desired function (for example ÉÅ , à , á)

Remove the plastic protective sheet

Setting system menu options

DIVX(R) VOD

Tip

LATIN

USB/

See chapters "Preparations" and "System Menu Options" in the User Manual for detailed descriptions.