Connect to analog stereo system
AUDIO IN
1 Connect the audio cables (supplied) to the AUDIO OUT L/R jacks on this DVD player and the audio input jacks on the device.
Tip
•You can optimize the audio output (see chapter ‘Adjust settings’ - [ Audio Setup ] > [ Analog Output ]) for details.
Connect USB device
Connect English
1 Connect the USB flash drive to the (USB) jack on this DVD player.
Note
•This DVD player can only play/view MP3, WMA, DivX or JPEG files that are stored on such devices.
• Press 
to access the content and play the files.
Connect to power outlet
Warning
•Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the DVD player.
1Connect the power cord to the power outlet.
The DVD player is ready to be set up for use.
EN 11