Turn on Progressive Scan
Connect a progressive scan TV with component video jacks (see chapter ‘Connect video cables - Option 1: Connect to component video jacks’ for details).
1 Turn on the TV to the correct viewing channel for this DVD player.
2 Press SETUP.
3 Press V to select [ Video Setup ].
4 Select [ Progressive ] > [ On ], then press OK.
A warning message is displayed.
Video Setup
| TV System |
|
|
|
|
|
|
|
|
| On |
| |
| TV Display |
|
|
| Off |
|
| Progressive |
|
|
|
|
|
| Picture Setting |
|
|
|
|
|
| Closed Caption |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
5 To proceed, select [ OK ] and press OK. The progressive setup is complete.
Note
•If a blank/distorted screen is displayed, wait for 15 seconds for the auto recover.
•If no picture displayed, turn off the progressive scan mode as follows:
1)Press Z to open the disc compartment.
2)Press the numeric button ‘1’.
6 To exit the menu, press SETUP.
7 You can now turn on the progressive scan mode on the TV (see the TV user manual).
Note
•During play, when progressive scan mode is on for both this DVD player and the TV, distorted picture may display. Turn off the progressive scan feature on both this DVD player and the TV.