Connections |
|
English |
|
| FM wire |
| antenna |
| MW loop |
| antenna |
| 4 |
| 3 |
Speaker | Speaker |
(right) | (left) |
| 2 |
| 5 |
| AC power cord |
IMPORTANT!
–The type plate is located at the rear of the system.
–Before connecting the AC power cord to the wall outlet, ensure that all other connections have been made.
–Never make or change any connections with the power switched on.
–High voltage! Do not open.You run the risk of getting an electric shock.
–The machine does not contain any user- serviceable parts.
–Modification of the product could result in hazardous radiation of EMC or other unsafe operation.
To avoid overheating of the system, a safety circuit has been built in.Therefore, your system may switch to Standby mode automatically under extreme conditions. If this happens, let the system cool down before reusing it (not available
for all versions).
Step 1: Placing speakers
Front | Front |
speaker | speaker |
( left ) | ( right ) |
VIEWING AREA
Place the front left and right speakers at equal distances from the TV set and at an angle of approximately 45 degrees from the listening position.
Notes:
–To avoid magnetic interference, do not position the front speakers too close to your TV set.
–Allow adequate ventilation around the DVD System.
12