Basic Functions
Switching the system on | DSC (Digital Sound Control) |
|
English
●Press ECO POWER/STANDBY-ON B (B on the remote).
➜“HELLO” is displayed briefly.The system will switch to the last selected source.
●Press SOURCE repeatedly (or DISC, TUNER, TAPE or AUX on the remote).
➜The system will switch to the selected source.
Switching the system to Eco Power Standby mode
●Press ECO POWER/STANDBY-ON B in the active mode.
➜ The system enters Eco power standby (the ECO POWER LED is on) or normal standby with clock display.
●The volume level (up to a maximum volume level of 12), interactive sound settings, last selected mode, source and tuner presets will be retained in the player's memory.
●If the system is normal standby with clock display, press and hold ECO POWER/STANDBY- ON Bfor 3 seconds or more to switch to Eco power standby or vice versa.
Power-saving automatic standby
As a
Sound Control
DBB, DSC and LOUDNESS sound features cannot be activated at the same time.
DBB (Dynamic Bass Boost)
DBB enhances the bass response.
●Press DBB on the remote to enable/disable DBB feature.
➜ Some discs might be recorded in high modulation, which causes a distortion at high volume. If this occurs, switch off DBB or reduce the volume.
DSC provides a different type of preset sound equalizer setting.
●Press DSC on the remote repeatedly to select: CLASSIC, JAZZ, POP or ROCK.
LOUDNESS
LOUDNESS feature enables the system to automatically increase the treble and bass sound effect at low volume (the higher the volume, the lower the treble and bass increase).
●Press LOUDNESS on the remote to enable or disable LOUDNESS feature.
➜ icon appears/disappears after this feature is enabled/disabled.
Volume control
Turn the VOLUME control on the front panel clockwise or anticlockwise or press VOL +/- on the remote to increase or decrease the volume level.
➜”VOL XX” is displayed on the display panel. “XX” denotes the volume level.
To listen through the headphone
●Connect the headphone plug to the n socket on the top of the back side of the DVD player. ➜ The speakers will be muted.
To switch off the volume temporarily
●Press MUTE on the remote.
➜ Playback will continue without sound and “MUTE” flashes.
●To activate sound reproduction, you can:
– press MUTE again;
– adjust the volume controls;
– change source.
21