Philips MCD289 user manual Placing the set and speakers, Connecting the power supply

Installation

English

Step 4: Placing the set and speakers

1After finishing all rear connections, mount the detachable cover on the back of the set until hearing a click to avoid cable clutter.

2Align the side marked PRESS4 of the stand to the slots at the bottom of the set.

3Push the stand down into the slots until you hear a click.

4Place the set upright on the desktop with the support of the stand.

5Extend the bracket on the back of each front speaker as shown so that the front speakers can stand firmly on the desktop.

6Place the subwoofer on the floor near an AC outlet.

Note:

– To remove the stand from the set, while pressing down PRESS4 , pull the stand out from the slots.

Step 5: Connecting the power supply

After everything is connected properly, plug in the AC power cord and adapter to the power outlet.

Never make or change any connection with the power switched on.

Optional: Connecting additional equipment

Listening to the playback of a non-USB

device

●Connect the system's AUX-INjack to the AUDIO OUT jacks on another audio/visual device (such as a VCR, Laser Disc player or cassette desk) using a "single-to-double" cinch cable (with one end providing a 3.5" connector for connection to the AUX-INjack while the other end providing two white/red connectors for connection to the other device's AUDIO OUT jacks).

Connecting a USB device or memory

card

IMPORTANT!

–Before connecting the USB plug, first slide down the movable baffle as shown

on Page 3 to expose the jack.

●Insert the USB device's USB plug into the socket on the set.

for the devices with USB cables:

1Insert one plug of the USB cable (not supplied)

to the socket on the set.

2Insert the other plug of the USB cable to the USB output terminal of the USB device.

for the memory card:

1Insert the memory card into a card reader (not supplied).

2Use a USB cable (not supplied) to connect the

card reader into the socket on the set.

14