Philips MCD289 user manual Important notes for users in the U.K, Mains plug, How to connect a plug

Page 2

Important notes for users in the U.K.

Mains plug

This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows:

1Remove fuse cover and fuse.

2Fix new fuse which should be a BS1362 3 Amp, A.S.T.A. or BSI approved type.

3Refit the fuse cover.

If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place.

If the mains plug contains a fuse, this should have a value of 3 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 3 Amp.

Note: The severed plug must be disposed of to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere.

How to connect a plug

The wires in the mains lead are coloured with the following code: blue = neutral (N), brown = live (L).

As these colours may not correspond with the colour markings identifying the terminals in your plug, proceed as follows:

Connect the blue wire to the terminal marked N or coloured black.

Connect the brown wire to the terminal marked L or coloured red.

Do not connect either wire to the earth terminal in the plug, marked E (or e) or coloured green (or green and yellow).

Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the two wires.

Copyright in the U.K.

Recording and playback of material may require consent. See Copyright Act 1956 and The Performer’s Protection Acts 1958 to 1972.

Italia

DICHIARAZIONE DI CONFORMITA’

Si dichiara che l’apparecchio MCD289 Philips risponde alle prescrizioni dell’art. 2 comma 1 del D.M. 28 Agosto 1995 n. 548.

Fatto a Eindhoven

Philips Consumer Electronics

Philips, Glaslaan 2

5616 JB Eindhoven,The Netherlands

Norge

Typeskilt finnes på apparatens underside.

Observer: Nettbryteren er sekundert innkoplet. Den innebygde netdelen er derfor ikke frakoplet nettet sŒ lenge apparatet er tilsluttet nettkontakten.

For å redusere faren for brann eller elektrisk støt, skal apparatet ikke utsettes for regn eller fuktighet.

CAUTION

Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.

VAROITUS

Muiden kuin tŠssŠ esitettyjen toimintojen sŠŠdšn tai asetusten muutto saattaa altistaa vaaralliselle sŠteilylle tai muille vaarallisille toiminnoille.

2

Image 2
Contents DVD Micro Theatre Mains plug How to connect a plugImportant notes for users in the U.K Copyright in the U.KPage STANDBY-ON Slow Angle Display Mute RDS Klass 1 laseraparat Windows Media is a trademark of Microsoft Corporation Manufactured under license from Dolby LaboratoriesProhibited 171 122147 Italiano Nederlands Deutsch Dansk SvenskaContents Radio Reception Clock/TimerSystem Menu Options External SourcesGeneral Information Supplied accessoriesCare and safety information Discs for playbackGeneral Information/Maintenance Hearing SafetyConnecting TV InstallationConnecting speakers Connecting the wireless subwooferUsing S-Video In jack Using A/V OUT jackUsing Component Video jacks Y Pb Pr Connect the DVD system directly to the TVConnecting a USB device or memory Card Connecting the power supplyOptional Connecting additional equipment Placing the set and speakersControls on the system Controls on the remote controlControls Loudness $ ModeSubtitle DSCPress 2/3 repeatedly to select Video Setup Press System MenuTo deactivate Progressive manually Setting language preferencePreparations System MenuBasic Functions Playing discs Using the disc menuDisc Operations Basic playback controlsSpecial disc features Playing MP3/WMA/JPEG Picture discZoom picture Jpeg Special Jpeg featuresPlaying a DivX disc Use 2/3/5/4 to view the zoomed pictureDivxr VOD registration code System Menu OptionsBasic operations ChurchProgressive and Interlace Password ModePassword This menu helps you to set the video qualitySetting the RDS clock Tuning to radio stationsTuning to preset radio stations Radio ReceptionSupported formats Using a USB mass storage deviceExternal Sources System will not play or support the followingTimer setting Clock/TimerClock setting Sleep timer settingDisc SpecificationsAmplifier TunerSolution TroubleshootingEnglish Problem Troubleshooting Set the clock correctly Device not Supported scrolls onDisplay Español Deutsch Nederlands Italiano Svenska Dansk Meet Philips at the Internet