Philips MCD139/78, HTM139 user manual Connecting the FM antenna, Connecting the power cord

Page 11

2 Using the audio cables (red/white, not supplied) Connect the system’s AUX IN (L/R) jacks to the AUDIO OUT jacks on the VCR or Cable/ Satellite box.

Before starting operation, press AUX on the remote control to select “AUX” in order to activate the input source.

Using the VCR for recording DVDs

Some DVDs are copyright-protected.You cannot record or dub protected discs using a VCR.

3 Connect the system’s COMPOSITE VIDEO jack to the VIDEO IN jack on the VCR.

4 Connect the system’s LINE OUT (R/L) jacks to the AUDIO IN jacks on the VCR. This will allow you to make analog stereo (two channel, right and left) recording.

To view DVD playback while recording You must connect the system to your TV system using the S-VIDEO(as shown above) or the COMPONENT VIDEO OUT (Pr Pb Y) video connection.

11

Connect the VCR or Cable/Satellite Box to the TV system as shown.

1

Connections

Step 6: Connecting a VCR or cable/satellite box

Viewing and listening to playback

ANTENNA FM

(75Ω)

Step 4: Connecting the FM antenna

●Connect the supplied FM antenna to the FM (75 Ω) jack at the back of the main unit. Extend the FM antenna and fix its end to the wall.

Step 5: Connecting the power cord

IMPORTANT!

–Never make or change any connection with the power switched on.

ANTENNA

FM

(75Ω)

●After everything is connected properly, plug in the AC power cord to the power socket.

English

Image 11

Contents HTM139 DVD Micro TheatreManufactured under license from Dolby Laboratories English IndexContents Tuner Clock/TimerEnvironmental information FeaturesSupplied accessories General InformationPlace the system on a flat, hard and stable surface Safety informationWhen a disc becomes dirty Type plate is located on the bottom of the system Connecting speakers and subwoofer Connections Placing speakersConnecting TV set Using an accessory RF modulator English Using S-Video In jackConnecting the power cord Connecting the FM antennaRecording digital Connecting digital audio equipmentDVD player Digital audio recorder Controls on the system Functional OverviewRemote control ¡ DSC MuteGoto ZoomGetting Started Using Remote ControlSetting up the TV Using the Remote Control to operate PlayerTo remove the menu Press System Menu MultiNtsc PALTo deactivate Progressive manually Setting language preferenceSetting the OSD Language Setting the Audio, Subtitle and Disc Menu languageSound Control Switching the system on/off Volume controlPower saving automatic standby Basic OperationsWMA-CDs CD-ROMs with WMA tracks Picture Jpeg files on CD-RW Disc OperationsPlayable Discs Region CodesResuming playback Using the Disc MenuUsing PBC feature available for 2.0-version VCD only Playing discsRepeat A-B Different play modes Repeat Shuffle and Repeat A-BEnglish Fast forwarding/reversing Chapter Elapsed elapsed playback time of current chapter Programming favourite tracksDisplay information For VCDs/CDsPlaying MP3/WMA/JPEG picture disc Subtitle DVD onlyPlaying a Title DVD only During playback, you can If the MP3-CD menu is switched offPlaying Kodak picture disc Title number will appearDVD Menu Operations Using the menu barScreen Saver default On Using the setup menu user preference settingsTV Display default Normal/PS This menu is accessible only in the stop postionTest Tone English Night ModeChanging the password OFFRating explanations Restricting playback by setting parental LevelDefault Use the numeric keys 0-9 to enter the four-digit codeDeleting a preset radio station Tuning to radio stationsStoring preset radio stations Listening to preset radio stationsSetting sleep timer Clock/TimerSetting clock Setting wake-up timerSpecifications Clean the disc TroubleshootingEnglish Problem SolutionRadio reception is poor Micro DVD player does not startPlayback Set the clock correctly Meet Philips at the Internet