Philips HTM139, MCD139/78 Connections, Placing speakers, Connecting speakers and subwoofer

Page 8

Connections

English

Step 1: Placing speakers and

subwoofer

Step 2: Connecting speakers and subwoofer

ANTENNA

FM

(75)

For best possible surround sound, locate your speakers and subwoofer as follows:

Place the left and right speakers at equal distances from the TV set and at an angle of approximately 45 degrees from the listening position.

Place the subwoofer on the floor.

Notes:

To avoid magnetic interference, position the speakers, subwoofer as far as possible from the main unit,TV set or other radiation source.

Allow adequate ventilation around the DVD System.

IMPORTANT!

The type plate is located on the bottom of the system.

To avoid overheating of the system, a safety circuit has been built in. Therefore, your system may switch to Standby mode automatically under extreme conditions. If this happens, let the system cool down before reusing it.

Connect the supplied DIN cable to DVD player’s DIN jack and the left speaker’s DIN jack.

Connect the supplied speaker wires of the right speaker to SPEAKER RIGHT on the left speaker, red wire to red jack ( “+” ), black wire to black jack ( “-“ ). Fully insert the stripped portion of the speaker wire into the terminal as shown.

Connect the supplied speaker wire of the subwoofer to SUBWOOFER OUT on the left speaker, green wire to green jack ( “+” ), white wire to white jack ( “-” ).

Notes:

For optimal sound performance, use the supplied speakers.

Do not connect more than one speaker to any one pair of +/- speaker terminals.

Do not connect speakers with an impedance lower than the speakers supplied. Please refer to the SPECIFICATIONS section of this manual.

8

Image 8
Contents DVD Micro Theatre HTM139Manufactured under license from Dolby Laboratories Index EnglishContents Clock/Timer TunerFeatures Supplied accessoriesGeneral Information Environmental informationPlace the system on a flat, hard and stable surface Safety informationWhen a disc becomes dirty Connecting speakers and subwoofer ConnectionsPlacing speakers Type plate is located on the bottom of the systemConnecting TV set English Using S-Video In jack Using an accessory RF modulatorConnecting the FM antenna Connecting the power cordRecording digital Connecting digital audio equipmentDVD player Digital audio recorder Functional Overview Controls on the systemRemote control Mute GotoZoom ¡ DSCUsing Remote Control Setting up the TVUsing the Remote Control to operate Player Getting StartedMulti NtscPAL To remove the menu Press System MenuSetting language preference Setting the OSD LanguageSetting the Audio, Subtitle and Disc Menu language To deactivate Progressive manuallySwitching the system on/off Volume control Power saving automatic standbyBasic Operations Sound ControlDisc Operations Playable DiscsRegion Codes WMA-CDs CD-ROMs with WMA tracks Picture Jpeg files on CD-RWUsing the Disc Menu Using PBC feature available for 2.0-version VCD onlyPlaying discs Resuming playbackRepeat A-B Different play modes Repeat Shuffle and Repeat A-BEnglish Fast forwarding/reversing Programming favourite tracks Display informationFor VCDs/CDs Chapter Elapsed elapsed playback time of current chapterPlaying MP3/WMA/JPEG picture disc Subtitle DVD onlyPlaying a Title DVD only If the MP3-CD menu is switched off Playing Kodak picture discTitle number will appear During playback, you canUsing the menu bar DVD Menu OperationsUsing the setup menu user preference settings TV Display default Normal/PSThis menu is accessible only in the stop postion Screen Saver default OnEnglish Night Mode Changing the passwordOFF Test ToneRestricting playback by setting parental Level DefaultUse the numeric keys 0-9 to enter the four-digit code Rating explanationsTuning to radio stations Storing preset radio stationsListening to preset radio stations Deleting a preset radio stationClock/Timer Setting clockSetting wake-up timer Setting sleep timerSpecifications Troubleshooting English ProblemSolution Clean the discRadio reception is poor Micro DVD player does not startPlayback Set the clock correctly Meet Philips at the Internet