Adjust settings, General setup, Audio setup

[Start at current time] - start recording immediately.

[Start from beginning] - start recording from the beginning of the current song.

•To exit without recording, press again

2Press to select an option, and press OK.

»The recording begins, and a recording progress bar is displayed.

»When the current song ends, the recording completes and stops.

»During recording, you may press

and follow the on-screen instructions to stop the recording.

7 Adjust settings

Note

•If the setup option is grayed out, it means the setting cannot be changed at the current state.

General setup

1	Press	.
	» [General Setup] menu is displayed.

2Press to enter the submenu.

3Select an option, and then press OK.

4Select a setting, and then press OK.

•To return to the previous menu, press

•To exit the menu, press .

[Disc Lock]

Set the play restriction for a disc which is loaded in the disc compartment (maximum 20 discs can be locked).

•[Lock] - Restrict the access to the current disc. At the next time when you want to play this disc or unlock it, you need to enter the password.

•[Unlock] - Play all discs.

[OSD Language]

Select a language for on-screen menu. [Sleep Timer]

Switch automatically to standby at the preset time.

•[Off] - Disable sleep mode.

•[15 Mins], [30 Mins], [45 Mins], [60 Mins] - Select the countdown time for this product to

switch to standby. [Auto Standby]

Turn on/off the auto standby mode.

•[On] - Switch to standby after 15 minutes of inactivity (for example, in pause or stop mode).

•[Off] - Disable the auto standby mode. [DivX(R) VOD Code]

Display the DivX® registration code and deregistration code.

•[Registration] - Obtain a registration code to register this product on website.

•[Deregistration] - Obtain a deregistration code to cancel the registration of this product on website.

Note

•Use this product’s DivX registration code when you rent or purchase video from www.divx.com/vod. The DivX videos rented or purchased through the DivX® VOD (Video On Demand) service can be played only on the device to which it is registered.

Audio setup

Audio Setup

Analogue Output

Digital Audio

HDMI Audio

Audio Sync

Volume

Sound Mode

CD Upsampling

Night Mode

1Press .

» [General Setup] menu is displayed.

2Press to select [Audio Setup], and then press to enter the submenu.

3Select an option, and then press OK.

4Select a setting, and then press OK.

•To return to the previous menu, press

•To exit the menu, press .

14EN