Philips HTP3560K/93 user manual Video setup, Hdmi Audio, Output

Page 14

[Analogue Output]

Select an analogue setting based on the audio device that is connected through the analogue audio jack.

[LT/RT] - For the surround sound output through two speakers.

[Stereo] - For the stereo output. [Digital Audio]

Select a digital setting based on the digital amplifi er/ receiver that is connected through the digital jack (coaxial/digital).

[Digital Output] - Select a type of digital output.

[All] - Support multi-channel audio formats.

[Off] - Disable digital output.

[PCM Only] - Downmix to two-channel audio format.

[LPCM Output] - Select the LPCM (Linear Pulse Code Modulation) output sampling rate.

[48kHZ] - For discs recorded at sampling rate of 48 kHz.

[96kHZ] - For discs recorded at sampling rate of 96 kHz.

Note

[LPCM Output] setting is only available if the [Digital Output] is set to [PCM Only].

The higher the sampling rate, the better the sound quality.

[HDMI Audio]

Select the HDMI audio setting when you connect this product and the TV with an HDMI cable.

[On] - Allow audio output through the TV and the speaker system. If the audio format on the disc is not supported, it will be downmixed to two-channel sound (linear-PCM).

[Off] - Disable the audio output from HDMI devices connected to this player.

[Audio Sync]

Set the delay time for audio output when you play a video disc.

1. Press OK.

2. Press to set the delay time.

3. Press OK to confi rm and exit.

[Volume]

Set the default volume level when you play a disc.

1. Press OK.

2. Press to set the volume.

3. Press OK to confi rm and exit.

[Sound Mode]

 

Select a preset sound effect to enhance the audio

 

output.

English

that is produced from the left and right audio

[3D] - Select a virtual surround sound effect

 

 

channels.

 

[Movie Mode] - Select a sound effect for

 

 

movies.

 

[Music Mode] - Select a sound effect for

 

 

music.

 

[CD Upsampling]

For better sound quality in stereo mode, convert the music CD to a higher sampling rate.

[Off] - Turn off CD-upsampling.

[88.2kHz] - Convert to twice the original sampling rate.

[176.4kHz] - Convert to four times the original sampling rate.

[Night Mode]

Make loud sound level softer and soft sound level louder so that you can watch the DVD movies at a low volume, without disturbing others.

[On] - Enjoy quiet viewing at night.

[Off] - Enjoy surround sound with a full dynamic range.

Note

Applicable only to Dolby Digital encoded DVDs.

Video setup

1

Press

.

 

» [General Setup] menu is displayed.

2 Press to select [Video Setup], and then press to enter the submenu.

3Select an option, and then press OK.

4Select a setting, and then press OK.

To return to the previous menu, press

.

To exit the menu, press

.

EN 15

Image 14
Contents DVP3560K Register your product and get support atContents Trademark notice Safety and important noticeCopyright notice About Progressive ScanProduct overview Your DVD playerPlayable media Option 1 Connect to the Hdmi jack ConnectConnect audio/video cables Option 2 Connect to the component video jacksGet started Connect powerPrepare the remote control Optional audio connectionsTurn on progressive scan Find the TV input channelSelect menu display language Use Philips EasyLinkPlay video PlayPlay a disc Play music Play MP3/WMA music Play photoQuick skip play Play photo as slideshowMedia copy Other featuresPlay from a USB fl ash drive Create MP3 fi lesRecord Karaoke Adjust Karaoke settingsKaraoke To exit the menu, select Exit, and then press OKAudio setup Adjust settingsGeneral setup Output Video setupHdmi Audio HD Jpeg EasyLink Turn on/off all EasyLink features 16 ENTV System PBC Preferences» Disc play starts if there is a disc in this product Care Update softwareAdditional information Specifi cationsSound TroubleshootingPicture Glossary PlayEnvironmental Protection Use Period Language Code