Getting Started
:c\a^h]
Finding the correct viewing channel
A Press 2 to turn on this unit.
B Turn on the TV and switch it to the correct
You may go to the lowest channel on your TV, then press the Channel Down button on your TV’s remote control until you see the Video In channel.
You may press ° button repeatedly on your TV’s remote control.
Usually this channel is between the lowest and highest channels and may be called FRONT, A/V IN, VIDEO, etc.
If you are using a RF modulator, set the TV to channel 3 or 4.
Refer to your TV user manual on how to select the correct input on your TV.
C If you are using external device, (such as audio system or receiver), turn it on and select the appropriate input source for this unit output. Refer to the device user manual for detail.
Setting language preferences
The language options are different depending on your country or region. It may not correspond to the illustrations shown on the user manual.
On-screen display (OSD) language
Select this to change the language of the On screen display menu of this unit. The menu language will remain once you have set it.
A Press SETUP on the remote control.
{General Setup Page } appears.
B Use | keys to select { OSD | ||
| Language } in the menu and press . | ||
|
|
| |
| General Setup Page |
| |
| Disc Lock |
|
|
| OSD Language | Auto (ENG) | |
| Sleep |
| ENGLISH |
| Lip Sync |
| FRANÇAIS |
| Volume |
| ESPAÑOL |
| Auto Standby |
| |
| DivX(R) VOD Code |
| |
|
|
|
|
|
|
|
|
C Use keys to select a language and press OK to confirm.
Notes:
–To synchronize with a Philips ‘EasyLink’ TV, the OSD language must be set to { Auto (xxx) }. This is the language available from the Philips ‘EasyLink’ TV.
–If a
18