Getting Started (continued)
Setting the EasyLink control
This feature enables HDMI CEC compliant devices to control each other with a single remote control. It is only available if you have connected this unit to HDMI CEC compliant TV or device with HDMI cable.
A Turn on the HDMI CEC operations on your TV and other connected devices. (Refer to your TV or connected devices manual for details.)
B Press SETUP on the remote control.
C Press repeatedly to select { Video Setup Page }.
D Use keys to select { HDMI Setup } > { EasyLink } and press to access.
EasyLink
Auto Wake Up TV
System Standby
The functions are turned on by default in the factory.
–To disable { Auto Wake Up TV } feature, select { Off }.
–To disable { System Standby } feature, select { Decline }.
E To exit, press SETUP.
One touch control
Notes:
–To enable one touch play function, a video disc must be placed in the disc compartment before operation.
–Philips does not guarantee 100% interoperability with all HDMI CEC compliant devices.
One touch play
Press 2.
It turns on this unit and start disc play. Your TV automatically turns on and
switches to the correct video channel.
One touch input switching
While this unit and TV are turned on;
Select a TV channel to watch TV programme or start play on other connected device.
This unit automatically switches to the corresponding audio input and output the sound from its speakers system.
One touch power off
Press STANDBY/POWER button to turn off this unit and all the HDMI CEC compliant devices.
When using this unit’s remote control, you have to press and hold 2.
:c\a^h]
21