E n g l i s h
Connections
Optional: Connecting to an | Optional: Connecting Digital AV |
Audio System | Receiver |
STEREO |
| AV Receiver |
| OPTICAL | |
OPTICAL | AUDIO |
|
AUDIO | OUT |
|
|
| |
OUT |
|
|
| DIGITAL |
|
DIGITAL |
|
|
OR
DIGITAL AUDIO OUT | CVBS | Y | DIGITAL AUDIO OUT | CVBS | Y |
PCM/MPEG2/Dolby Digital |
|
| PCM/MPEG2/Dolby Digital |
|
|
L
R |
COAXIAL OPTICAL | Pr | Pb |
| COAXIAL OPTICAL | Pr | Pb |
STEREO |
Stereo system has Dolby Pro Logic or Right / Left Audio In jack
1Select one of the video connections
(CVBS VIDEO IN,
2Use the audio cables (white/red) to connect AUDIO OUT (L/R) jacks of the DVD Player to the corresponding AUDIO IN jacks on the stereo system (cable not supplied).
Receiver has a PCM, Dolby Digital, or MPEG2 decoder
1Select one of the video connections
(CVBS VIDEO IN,
2Connect the COAXIAL or OPTICAL jack of the DVD Player to the corresponding Digital Audio In jack on your Receiver (cable not supplied).
3Set the DVD Player’s Analog Output to ‘Stereo’ which delivers sound from only the two front speakers. (see page 28 “Setting the analogue output”).
Helpful Hint:
–If the audio format of the Digital Output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all.
10