Audio Setup Menu, Stereo, Lt/Rt, Virtual Surround

DVD Setup Menu Options

E n g l i s h

Audio Setup Menu

1In disc mode, press SYSTEM MENU.

2Press 1 2 to select ‘Audio Setup’ icon.

3Press OK to confirm.

- - AUDIO SETUP PAGE - -

ANALOG OUTPUT

DIGITAL AUDIO SETUP

SPEAKER SETUP

CD UPSAMPLING

NIGHT MODE

Digital Audio Setup

The options included in Digital Audio Setup are:‘Digital Output’ and ‘LPCM Output’.

1In ‘AUDIO SETUP PAGE’, press 34to highlight {DIGITAL AUDIO SETUP}, then press 2.

2Press the 34keys to highlight an option.

3Enter its submenu by pressing 2.

4Move the cursor by pressing the 34keys to highlight the selected item.

Digital Output

Set the Digital output according to your optional audio equipment connection.

➜Off:Turn off the digital output.

➜All: If you have connected your DIGITAL AUDIO OUT to a multi-channel decoder/receiver.

➜PCM Only: Only if your receiver is not capable of decoding multi-channel audio.

Helpful Hints:

–If DIGITAL OUTPUT is set to ‘All’, all audio settings except MUTE are invalid.

–You cannot hear or record the SACD playback if you use the digital connection.

LPCM Output

If you connect the DVD Player to a PCM compatible receiver via the digital terminals, such as coaxial or optical etc, you may need to adjust ‘LPCM Output’. Discs are recorded at a certain sampling rate.The higher the sampling rate, the better the sound quality.

➜48kHz: Playback a disc recorded at the sampling rate of 48kHz.

➜96kHz: Playback a disc recorded at the sampling rate of 96kHz that can only be achieved in Stereo-Classic mode.

Helpful Hint:

–LPCM Output can be selected only when PCM Only is activated.

Setting the analogue output

Set Analogue Output to match your DVD Player’s playback capability. This function can also be accessed via the SURROUND button on the remote.

1In ‘AUDIO SETUP PAGE’, press 34to highlight {ANALOG OUTPUT}, then press 2.

STEREO

Select this to change channel output to stereo which delivers sound from only the two front speakers.

LT/RT

Select this option if your DVD Player is connected to a Dolby Pro Logic decoder.

VIRTUAL SURROUND

Allows the DVD player to use virtual surround sound effects.

2Press 34 to select a setting, then press OK to confirm your selection.

TIPS: To return to the previous menu, press 1.

To remove the menu, press SYSTEM MENU.